This section describes the navigation tree of the Web system.
Each node has subnodes, as described in Table 1.
NOTE: The menus in the navigation tree vary depending on switch models.
Node |
Subnode |
Description |
|---|---|---|
Device Summary |
Panel |
Displays information about the device panel. |
System Description |
Displays the name, software version, and fan status of the switch. |
|
Board Health |
Displays the current CPU usage, memory usage, and temperature of the switch. |
|
Board Status Diagram |
Displays the board status, power module, and slots of the device. |
|
Board Information |
Displays basic information about boards on the device. |
|
Bandwidth Utilization |
Displays the bandwidth utilization of the interface. |
|
System Log |
Displays the latest ten logs. |
|
Trends |
Allows you to view the CPU usage, memory usage, temperature, and port usage of the device according to your selection. |
|
Configuration Wizard |
EasyOperation |
Helps quickly configure global Easy-Operation parameters to implement basic functions for Easy-Operation. |
System Management |
Initialization |
Restores the factory settings of the switch. |
Reboot |
Chooses the system software, configuration file, and patch file for next startup of the switch. |
|
Software Upgrade |
Upgrades the software of the switch. |
|
Patch |
Loads the patch file to the switch. |
|
File System Management |
Manages files, including uploading files to the switch, downloading files from the switch, and restoring or permanently deleting files in the recycle bin. |
|
System Configuration |
Sets the system information such as the system time and maintenance information. |
|
DNS |
Configures and displays dynamic DNS entries, DNS server, domain name suffix, and dynamic domain name resolution function. |
|
CSS |
Configures and displays the stacking function. |
|
Log Management |
Allows you to view operation logs. |
|
SNMP |
Configures the SNMP functions, including SNMP global settings, community/group management, MIB view, and trap setting. |
|
EasyOperation |
Configures roles, groups, and clients to implement Easy-Operation. |
|
IP Management |
Configures management VLAN. |
|
Interface Management |
Ethernet |
Configures and displays basic attributes of interfaces and traffic statistics on the interfaces. |
Eth-Trunk |
Configures and displays Eth-Trunk interfaces and LACP priority. |
|
VLANIF |
Configures and displays VLANIF interfaces. |
|
LoopBack |
Configures and displays the LoopBack interfaces. |
|
Service Management |
VLAN |
Configures and displays VLANs, interfaces, and VLANIF interfaces. |
MAC |
Configures and displays MAC address table, MAC address aging time, MAC address learning function, static MAC address entries, blackhole MAC address entries, and sticky MAC function. |
|
STP |
Configures and displays global STP information, STP on interfaces, and domains. |
|
Voice VLAN |
Configures and displays voice VLAN and OUI. |
|
DHCP |
Configures and displays DHCP global address pool, address pool on VLANIF interface, and DHCP relay. |
|
ARP |
Configures and displays ARP entries, static ARP entries, and ARP parameters. |
|
VRRP |
Configures and displays VRRP information. |
|
IGMP Snooping |
Configures and displays global IGMP information and IGMP snooping of VLANs. |
|
ACL |
Effective Period |
Configures and displays the ACL effective period. |
ACL |
Configures and displays ACL information. |
|
HTTP ACL |
Configures and displays HTTP ACL. |
|
QoS |
Traffic Management |
Configures and displays the class-based QoS function, including traffic classifier, traffic behavior, traffic policy, and application of traffic policy. |
Rate Limiting |
Configures and displays the interface rate limiting function. |
|
Traffic Shaping |
Configures and displays the traffic shaping function. |
|
Congestion Management |
Configures and displays congestion management on interfaces. |
|
IP Routing |
IPv4 Route |
Configures and displays IPv4 routes, including IPv4 static routes and global IPv4 routing information. |
IPv6 Route |
Configures and displays IPv6 routes, including IPv6 static routes and global IPv6 routing information. |
|
Security |
Port isolation |
Configures and displays isolation mode and isolation directions. |
AAA |
Configures and displays the security functions, including authentication, authorization, and accounting (AAA), service templates, RADIUS configurations, domain management, user management, and change mode. |
|
802.1X |
Configures and displays global 802.1X parameters and 802.1X parameters on interfaces. |
|
MAC Authen |
Configures and displays global MAC address authentication and MAC address authentication on interfaces. |
|
Storm Control |
Configures and displays storm control and traffic suppression. |
|
DAI |
Configures and displays DAI. |
|
IPSG |
Configures and displays IPSG. |
|
DHCP Snooping |
Configures and displays dhcp snooping. |
|
Tools |
Ping |
Provides the ping function. |
Tracert |
Provides the tracert function. |
|
VCT |
Provides the VCT function. |
|
One-Click Information Collection |
Enables you to collect device information including configurations, logs, and errors by one click. |