Configuring a VLANIF Interface Address Pool

If a DHCP server based on a VLANIF interface address pool is configured, all the users going online through this interface obtain IP addresses from the VLANIF interface address pool.

Context

Enable the DHCP service before configuring an address pool on a VLANIF interface.

Procedure

Query information about a VLANIF interface address pool.

Choose Service Management > DHCP > Configure VLANIF Interface Address Pool in the navigation tree to display the Configure VLANIF Interface Address Pool page.
Set the search criteria.

Click Query to display all the matching records.

Table 1 describes the parameters for querying information about a VLANIF interface address pool.

**Table 1** Parameters for querying information about a VLANIF interface address pool
Parameter	Description
VLANIF name	Indicates the name of a VLANIF interface. NOTE: The VLANIF interface must be configured to work in the interface address pool or global address pool mode; otherwise, there is no matching record.
Total:1	Indicates the number of matching records. The following information is displayed: VLANIF Name Address Pool type Interface IP Mask Gateway IP Lease Period Forbidden IP For detailed meaning of each item, see Table 2.

Create a VLANIF address pool.

Choose Service Management > DHCP > Configure VLANIF Interface Address Pool in the navigation tree to display the Configure VLANIF Interface Address Pool page.

Click Create to display the Create a VLANIF Address Pool page.

Table 2 describes the parameters on the Create a VLANIF Address Pool page.

**Table 2** Parameters on the Create a VLANIF Address Pool page
Parameter		Description
Basic Settings	VLANIF name	Indicates the name of a VLNAIF interface. Select a name from the drop-down list box. NOTE: The VLANIF interfaces in the drop-down list box are created in the Interface Management module.
	Address pool type	Indicates the address pool type of a VLNAIF interface. global: The interface works in the global address pool mode. interface: The interface works in the interface address pool mode.
	Interface IP	Indicates the IP address of the selected VLANIF interface. The value is displayed automatically after you select a VLANIF interface.
	Mask	Indicates the subnet mask of the selected VLANIF interface. The value is displayed automatically after you select a VLANIF interface.
	Lease Period	Indicates the lease of dynamic IP addresses. The default lease is one day. The value range is as follows: day: an integer ranging from 0 to 999 hour: an integer ranging from 0 to 23 minute: an integer ranging from 0 to 59 NOTE: This parameter can be configured only when the address pool type is interface. Different address pools can have different IP address leases, but addresses in one pool have the same lease.
	Forbidden IP	Indicates the IP address that will not be dynamically allocated to users. Some IP addresses are allocated to applications such as the DNS server and cannot be allocated to users. You can specify these IP addresses as forbidden IP addresses. NOTE: This parameter can be configured only when the address pool type is interface.
Configure DNS for the Address Pool	Client domain name	Indicates the domain name allocated by the DHCP server to the client. NOTE: This parameter can be configured only when the address pool type is interface.
Configure DNS for the Address Pool	DNS server IP	Indicates the IP address of a DNS server. You can configure a maximum of eight DNS server addresses. NOTE: This parameter can be configured only when the address pool type is interface.
Configure NetBIOS for the Address Pool	NetBIOS node type	Indicates the type of a NetBIOS node. The options are: unspecified The NetBIOS node type is not specified. b-node The NetBIOS node obtains the mapping between the host name and IP address in broadcast mode. b represents broadcast. p-node The NetBIOS node obtains the mapping between the host name and IP address by communicating with the NetBIOS server. p represents peer to peer. m-node The NetBIOS node is a p-type node with some broadcast features. m represents mixed. h-node The NetBIOS node is a b-type node using the peer-to-peer communication mechanism. h represents hybrid. The default value is unspecified. NOTE: This parameter can be configured only when the address pool type is interface.
Configure NetBIOS for the Address Pool	NetBIOS server IP	Indicates the IP address of a NetBIOS server. You can configure a maximum of eight NetBIOS server addresses. NOTE: This parameter can be configured only when the address pool type is interface.

Set the parameters.
Click OK.

Modify VLANIF Address Pool
1. Choose Service Management > DHCP > Configure VLANIF Interface Address Pool in the navigation tree to display the Configure VLANIF Interface Address Pool page.
2. Click to display the Modify VLANIF Address Pool page.
  NOTE:
  - Table 2 describes the parameters on the Modify VLANIF Address Pool page.
  - Address pool name, Interface IP and Mask cannot be modified.
3. Set the parameters.
4. Click OK.
Delete a VLANIF Address Pool
1. Choose Service Management > DHCP > Configure VLANIF Interface Address Pool in the navigation tree to display the Configure VLANIF Interface Address Pool page.
2. Select a record that you want to delete and click Delete. The system asks you whether to delete the record.
3. Click OK.