802.1X Global Settings

Procedure

1. Choose Security > 802.1X > 802.1X Global Settings in the navigation tree, and the 802.1X Global Settings page is displayed.

   Table 1 describes the parameters on the 802.1X Global Settings page.

   Table 1 802.1X Global Settings

   Parameter	Description
   Global 802.1X	Indicates whether to enable global 802.1x authentication. The options are Enabled and Disabled. By default, the value is Disabled. 802.1x parameters can be set before global 802.1x authentication is enabled, but take no effect. After global 802.1x authentication is enabled, 802.1x parameters can be set before of each interface takes effect.
   Quiet period	Indicates whether to enable the quiet timer function. The options are Enabled and Disabled. By default, the value is Disabled. NOTE: If a user fails to pass 802.1x authentication after the quiet timer function is enabled, the system keeps the user quiet for a period. In this manner, the impact caused by frequent authentication is prevented. During the quiet period, the switch discards 802.1x authentication request packets from the user.
   DHCP trigger	Indicates whether to trigger the 802.1x authentication after receiving DHCP messages. The options are Enabled and Disabled. By default, the value is Disabled. The switch is enabled to trigger 802.1x authentication after receiving DHCP messages. If a user fails to pass authentication, the user cannot dynamically obtain an IP address from the DHCP server.
   Handshake	Indicates whether to enable the handshake function. The options are Enabled and Disabled. By default, the value is Disabled. NOTE: Not all clients support the handshake function. If a client does not support the handshake function, the switch will not receive handshake response packets within the handshake interval. In this case, you need to disable the handshake function to prevent the switch from disconnecting users by mistake.
   Number of quiet failures	Indicates the number of authentication failures before the 802.1x user enters the quiet state.
   Retry times	Indicates the number of retransmission times. If the switch does not receive a response after sending an authentication request to a user, the switch retransmits the authentication request to the user. If the switch still fails to receive the response when the number of sent authentication requests reaches the limit, the switch does not send the authentication request to the user any more.
   Client timeout	Indicates the timeout interval of the response from the client.
   Handshake interval	Indicates the interval of handshakes between the switch and the 802.1x client. NOTE: The value range varies depending on the device model.
   Re-authentication interval	Indicates the re-authentication interval. After a user passes 802.1x authentication, the device sends a re-authentication request to the access user after a period. The re-authentication interval is controlled by the re-authentication timer.
   Authentication request interval	Indicates the interval for sending authentication requests.
   Quiet period	Indicates the value of the quiet timer. If a user fails to pass 802.1x authentication, the access device waits until the quiet timer expires and re-initiates authentication requests. During the quiet period, the authentication device does not process authentication requests from the user.

2. Set the parameters.
3. Click Apply to complete the configuration.