Navigation Tree

The web system consists of five areas: Monitoring, Configuration, Diagnosis, Maintenance, and Network, and provides the following functions: device status overview, interface management, VLAN, DHCP, system management, service management, diagnosis tool, and network deployment.

Table 1 lists submenus in the four areas and describes their functions.

NOTE:

The menus and submenus described in this section are used for reference only because the menus of different switch models have slight differences.

**Table 1** Description of the web system menus
Menu	Submenu		Description
Monitoring	Summary (Standalone)		Display the device panel, system description, switch status, top 5 bandwidth usage, logs, and alarms.
	Summary (SVF)		Display SVF brief information and switch status.
	User		Display access user information.
	Topology (SVF)		Display level-1 AS topology.
	Wired Service (SVF)		Display information about AS and user port group.
	Wireless Service	Radio	Display radio distribution and information.
		AP	Display AP distribution, AP statistics, and wired port statistics.
		SSID	Display SSID and VAP.
		Mesh&WDS	Display mesh links and WDS bridge information.
		Potential Risk	Display the STAs receiving poor signals and related radio information.
		WIDS	Display detection information about wireless devices and attacked devices.
		Spectrum Analysis	Provide spectrum analysis.
Configuration	SVF Quick Config (SVF)	SVF Enabling	Configure a standalone switch as the parent.
		AS Addition	Add ASs to an SVF and configure Fabric-Port.
		AS User-Side Service	Configure services on AS user port group.
		AP Addition	Add APs to an SVF.
		AP User-Side Service	Configure AP services.
		Network-Side Service	Allow users to access the external network.
	Advanced SVF Config (SVF)	AS Access Mgmt	Add AS blacklist and whitelist and an AS group to an SVF system.
		AS Port Group	Add an AS port group to an SVF system.
		AS Profile Mgmt	Add AS profiles to an SVF system.
		AS Direct Config	Configure ASs on the parent directly.
	Basic Services	Interface Settings	Interface configuration includes the following configuration pages: View Configuration, Connect to PC, Connect to IP Phone, Connect to Switch, Connect to Router, Enable/Disable Interface, Port Loopback Test, and Detect Link.
		View Transceiver Info	Display optical module information.
		VLAN	Configure and query VLANs, Modify VLANs, and Delete VLANs.
		DHCP	Configure and query DHCP address pool on VLANIF interface, and DHCP relay.
		Static Route	Configure static routes.
	Advanced Services	Voice VLAN	Configure voice VLAN.
		MAC	Query MAC/IP address table, Configure static MAC address entries, Configure static secure MAC address, Configure blackhole MAC address entries, and Delete MAC address entries function.
		IP Services	Configure IP services.
		IP Route	Configure IP route.
		VRRP	Configure VRRP.
		LBDT	Configure the loopback detection function.
		STP	Configure the STP function.
		LLDP	Configure the LLDP function.
		IGMP Snooping	Configure IGMP snooping.
		MLD Snooping	Configure MLD snooping.
		PoE	Provide PoE management.
		Mirroring	Configure mirroring.
		CSS	Configure CSS.
	Security Services	ACL Config	Configure ACLs.
		ACL Reference	Reference ACLs.
		AAA	Configure AAA.
		AAA Service App	Apply AAA.
		AAA Profile Mgmt	Provide AAA profile management.
		ACL	Configure interface ACLs and VLAN ACLs to filter packets.
		User Access Control	Configure Authentication Configuration, Portal Server, and Access Configuration to provide security management on the network.
		QoS Configuration	Configure QoS.
		IP Security	Configure IP security.
		Storm Control	Configure storm control.
		Port Isolation	Configure port isolation.
	Fast WLAN Config (Standalone)	AC	Configure network connections and allow APs to go online.
		AP	Configure WLAN service and allow STAs to go online.
		Mesh	Configure the mesh network.
	Wireless Services	AC Config	Set CAPWAP parameters and configure radio calibration.
		AP Group	Configure AP groups and static load balancing.
		AP Config	Add and manage APs.
		Profile	Configure the WLAN profiles.
Diagnosis	Intelligent Diagnosis		Enable intelligent diagnosis for switches, APs, and STAs on WLAN.
	One-Click Information Collection		Collect information on a device, including the configuration, logs, and errors.
	Wireless Packet Capturing		Obtain wireless packets to locate faults.
	Ping		Check network connectivity and host reachability.
	Trace RouteC		Check the gateways that packets pass through from the source host to the destination host.
	AAA Test		Check whether the user can pass the RADIUS authentication.
	RF-Ping		Check the quality of the link between the AP and STA.
	AP-Ping		Check connectivity between the AP and network device.
	Interference Detection		Check interference detection information on AP radios.
	Trace User/AP		Diagnose users or APs and record diagnosis information in a diagnosis file.
	Configuration Check		Check the version mapping between the AP and switch, RF parameters, network parameters, and common functions.
	Wired Diagnosis		Collect card configurations and display detailed alarm information.
Maintenance	System Maintenance	License	Load license files and display license status.
		Restart (Standalone)/Reboot (SVF)	Restart the switch.
		Upgrade	Upgrade the system software.
		Web File Management	Manage web files.
		Patch	Upload, install, and uninstall patches.
		Log	Display the latest 300 logs.
		Alarm	Display the latest 300 alarms.
		Administrator	Manage web users.
		System	Manage the system, including files, system time, system information, and factory settings recovery.
		SNMP	Configure the SNMP agent function.
		Electronic Label	Display elabel information on the switch.
		AS Interface (SVF)	Display AS interface information.
	AP Maintenance	AP Upgrade	Upgrade APs.
		AP Restart	Restart APs.
		Log	Manage AP logs.
		Account	Manage AP accounts.
Network (Standalone)	Role Configuration		Determine the role of a device before configuring EasyDeploy on the device.
	Summary		Display network topology information and saves the network topology on the device.
	Deployment		Deploy unconfigured devices, replace faulty devices, and perform batch upgrade based on the network topology.
	Batch Configuration		Perform batch configuration on the devices by delivering command line scripts to the specified devices.
	Power Consumption		Display power consumption of all the devices on the entire network and of each device.