Service Settings

Procedure

• Set the country code for an AP group.
  1. Choose Configuration > Fast WLAN Config > AP. Select a desired AP group in AP Group List and click the Service Settings tab.
  2. Select the target country or area in the Country code drop-down list box, and click Apply.
• Create an SSID in an AP group.
  1. Choose Configuration > Fast WLAN Config > AP. Select a desired AP group in AP Group List and click the Service Settings tab.
  2. Click Create and configure SSID parameters in the displayed window. For description of the parameters, see Table 1, Table 2, and Table 3.

     Table 1 Basic SSID parameters

     Parameter	Description
     SSID	SSID name.
     Forwarding mode	Data forwarding mode of the corresponding AP.
     Service VLAN ID	ID of a service VLAN.
     Radio	Radio to which a VAP is applied.
     WLAN ID	VAP corresponding to the SSID.

     Table 2 SSID security parameters

     Parameter	Description
     Security Settings	Security policy used on a wireless network. High: WPA-WPA2 802.1X Medium: WPA-WPA2 PSK Low: OPEN
     Encryption mode	Encryption mode of a security policy. This parameter is valid only when Security Settings is set to High or Medium.
     Password type	Password format of a security policy. This parameter is valid only when Security Settings is set to Medium.
     Password/Confirm password	Encryption password of a security policy. This parameter is valid only when Security Settings is set to Medium.

     Table 3 SSID authentication parameters

     Parameter	Description
     Authentication mode	Authentication mode used by an STA that accesses a wireless network using the SSID.
     Server IP	IP address of an external RADIUS server. This parameter is valid only when Authentication mode is set to External RADIUS.
     Port number	Port number of an external RADIUS server. This parameter is valid only when Authentication mode is set to External RADIUS.
     Shared key/Confirm shared key	Shared key of an external RADIUS server. This parameter is valid only when Authentication mode is set to External RADIUS.
     Access mode	Access mode of an external RADIUS server. This parameter is valid only when Authentication mode is set to Local authentication or External RADIUS.
     External Portal Server	External Portal server, which is valid only when Access mode is set to External Portal Server. Server name: name of an external Portal server URL: interface URL of an external Portal server Server IP: IP address of an external Portal server Port number: port number of an external Portal server Shared key/Confirm shared key: shared key of an external Portal server

  3. Click OK.
• Add an SSID to an AP group.
  1. Choose Configuration > Fast WLAN Config > AP. Select a desired AP group in AP Group List and click the Service Settings tab.
  2. Click Add. Configure SSID parameters in the displayed window. For description of the parameters, see Table 4.

     Table 4 SSID parameters

     Parameter	Description
     Select SSID	SSID that has been created in another AP group.
     Radio	Radio associated with the SSID.
     WLAN ID	VAP associated with the SSID.

• Remove an SSID from an AP group.
  1. Choose Configuration > Fast WLAN Config > AP. Select a desired AP group in AP Group List and click the Service Settings tab.
  2. Select the SSID that you want to remove and click Remove.
  3. Click OK in the displayed window.