AS Port Group

Create an AS port group.

Click Create.

Table 1 describes parameters on the page.

**Table 1** Parameters for creating an AS port group
Parameter	Description
Port Group Name	Specifies the name of a port group.
Whether Connected to AP	Specifies a port type: Yes: indicates a port connected to an AP. No: indicates a port connected to a user.
Network Basic Profile	Specifies the name of a network basic profile to be bound to the port group. Click Manage to select the name of the network basic profile to be bound. NOTE: This parameter is valid only when there is a network basic profile list after you choose Advanced SVF Config > AS Profile Mgmt > Network Basic Profile.
Network Enhanced Profile	Specifies the name of a network enhanced profile to be bound to the port group. NOTE: This parameter is valid only when Whether Connected to AP is set to No and there is a network enhanced profile list after you choose Advanced SVF Config > AS Profile Mgmt > Network Enhanced Profile.
User Access Profile	Specifies the name of a user access profile to be bound to the port group. NOTE: This parameter is valid only when Whether Connected to AP is set to No and there is a user access profile list after you choose Advanced SVF Config > AS Profile Mgmt > User Access Profile.

Add an AS port group.
1. Choose Configuration > Advanced SVF Config > AS Port Group.
2. Click . The page for viewing AS port groups is displayed.
3. Click Create. The Add AS Port dialog box is displayed.
4. Select an AS and click Add All or Add Selected to add all AS interfaces connected to APs to the list.
5. Click OK.
  
  You can click Manage member ports to modify AS ports.
Delete an AS port group.
1. Choose Configuration > Advanced SVF Config > AS Port Group.
2. Select the required AS port group and click Delete.
3. In the dialog box that is displayed, click OK.