Client Configuration

Procedure

• Query client information.

  1. Choose System Management > EasyOperation > Client Configuration in the navigation tree to display the Client Configuration page

  2. Table 1 describes the parameters for querying client information.

     Table 1 Client query parameters

     Parameter	Description
     Client ID	Enter the ID of the client you want to query.
     MAC	Enter the MAC address of the client you want to query.
     ESN	Enter the ESN of the client you want to query.
     IP	Enter the IP address of the client you want to query.
     Replacement configuration	All: Displays all information meeting the search criteria. Configured: Displays client replacement information meeting the search criteria. Not configured: Displays information meeting the search criteria other than client replacement information.

  3. Set the search criteria.
  4. Click Query. The system displays the information meeting the search criteria in the client list and client replacement information list.

• Add a client.

  1. On the Client Configuration page, click Create to display the Add Client dialog box

     Table 2 describes the parameters for a new client.

     Table 2 Parameters for a new client

     Parameter	Description
     Client ID	This parameter is mandatory. Enter the ID of the client you want to add.
     Device MAC	Enter the client's MAC address or ESN. Only one of the two parameters can be configured.
     Device ESN
     File Download Settings	Specify files to be downloaded.

  2. Set the parameters and click OK.

• Add clients in a batch.

  1. On the Client Configuration page, click Batch to display the Batch dialog box

  2. Click template.zip to download this template to your computer, and then enter client information in the template.
  3. Click Browse and select the template.
  4. Click to import client information from the template.
     NOTE:

     The mode in which the template is imported varies according to the browser you use. If you use the Firefox browser, you can drag the template to the location where the template needs to be imported, removing the need to perform steps 3 and 4.

  5. Check the imported client information in the Import result area, including client ID, MAC address, and ESN of each client.
  Information about new clients is displayed in the client list . If Client auto join is enabled on the Commander and the Commander IP address has been configured on the clients, the client list displays client information learned by the Commander. Besides, the current operating method, phase, and state of each client are also displayed. The following are the examples of information that may be displayed:

  • Method: Normal running, Proactively upgrades, Empty configuration upgrade, usb upgrade, Unknown method
  • Stage: Initialization, Applicate IP, Access to download the file information, Download, Active file, Normal running, Unknown stage
  • State: Finish, Download system-software file, Download configuration file, Download patch file, Download web file, Download license file, Download custom file1, Download custom file2, Download custom file3, Unknown state

• Configure client replacement information.

  1. In the client list , click next to the record of the faulty client to display the Replacement information page

  2. Configure client replacement information.

     Table 3 describes the parameters for client replacement.

     Table 3 Replacement information

     Parameter	Description
     Client ID	Enter the ID of the faulty client.
     Device MAC	Enter the new client's MAC address or ESN. Only one of the two parameters can be configured.
     Device ESN
     File Download Settings	Specify files to be downloaded.

  3. Set the parameters and click OK.