Checking the Tier Status

Procedure

1. On the CLI, run show storage_pool general pool_id=0 and check whether Running Status of the storage pool is Offline.

   

   NOTE:

   For example, in the preceding figure, the Disk Domain ID of storage pool 0 is 0, Health Status is Fault, and Running Status is Offline.
   • If yes, go to step 6.
   • If no, go to step 2.

2. Check whether an alarm is displayed indicating that a disk is removed from the disk domain where the storage pool resides (ID: 0x100F00A0010).

   For details about how to view an alarm on the DeviceManager, see Checking System Alarms.

   • If yes, reinsert the removed disk and go to step 3.
   • If no, go to step 4.

3. Perform the check again to observe whether the check item fails.
   • If yes, go to step 4.
   • If no, no further action is required.

4. Check whether Health Status of the storage pool is Fault.
   • If yes, go to step 6.
   • If no, go to step 5.

5. Check whether an alarm is displayed indicating that a disk in the disk domain where the storage pool resides is abnormal (fault alarm ID: 0xF00A0001, imminent-fault alarm ID: 0xF00A0003, slow-disk alarm ID: 0xF00A000D or 0xF000A005F).
   • If yes, replace the faulty disk.
   • If no, go to step 6.
   NOTE:

   For details about how to replace a disk module, see OceanStor 5300 V3&5500 V3&5600 V3&5800 V3&6800 V3&6900 V3 Storage SystemV300R001 Parts Replacement or OceanStor 5300 V3&5500 V3&5600 V3&5800 V3&6800 V3 Storage System V300R002 Parts Replacement:

   • For controller of 5300 V3/5500 V3, see Replacing a Disk Module (12-Slot) and Replacing a Disk Module (25-Slot).
   • For disk enclosure, see Replacing a Disk Module (24-Slot) and Replacing a Disk Module (25-Slot).
   • For high-density disk enclosure, see Replacing a Disk Module .

6. Collect related information and contact technical support engineers.