Checking the HyperVault

Procedure

1. Log in to DeviceManager to check whether a link down alarm is reported.
   • Yes => check whether the device connection is normal. Ensure that the remote device is linked up. If the alarm persists, go to 2.
   • No => 2.

2. Check whether an alarm is reported indicating a fault on the hypervault source end FS, backup end FS, or the storage pool where the FS resides.
   • Yes => Clear the alarm by performing recommended actions. If the alarm persists, go to 3.
   • 否 => 3.

3. Collect related information and contact Huawei technical support engineers.