Checking the Hotspare

Procedure

1. Check whether an alarm is displayed indicating that a disk is removed from the disk domain (ID: 0x100F00A0010).

   For details about how to view an alarm on the DeviceManager, see Checking System Alarms.

   • If yes, reinsert the removed disk and go to step 2.
   • If no, go to step 3.

2. Perform the check again to observe whether the check item fails.
   • If yes, go to step 3.
   • If no, no further action is required.

3. Check whether an alarm is displayed indicating that a disk in the disk domain is abnormal (fault alarm ID: 0xF00A0001, imminent-fault alarm ID: 0xF00A0003, slow-disk alarm ID: 0xF00A000D or 0xF000A005F).
   • If yes, use the FRU tool to replace the faulty disk.
   • If no, go to step 4.

4. Collect related information and contact technical support engineers.