Checking Bit Errors

Checking ETH, SAS, FCoE and PCIe Bit Errors

  1. Replace the cable. Check ETH, SAS, FCoE and PCIe Bit errors again to determine whether the check is passed.

    • If yes, no further action is required.
    • If no, go to step 2.

  2. Replace the interface module where the port resides and the interface module where the peer port resides in sequence. Perform the check again to determine whether the check is passed.

    • If yes, no further action is required.
    • If no, go to step 3.

  3. If you have any questions, contact Huawei technical support engineers.

Checking Fiber Channel Bit Errors

  1. Replace the cable. Check fiber channel bit errors again to determine whether the check is passed.

    • If yes, no further action is required.
    • If no, go to step 2.

  2. Check whether an optical module is inserted into the port.

    • If yes, go to step 3.
    • If no, go to step 4.

  3. Replace the optical module of the port and the optical module of the peer port in sequence. Perform the check again to determine whether the check is passed.

    For details about how to replace an optical module, see Replacing an Optical Module in OceanStor S2600T&S5500T&S5600T&S5800T&S6800T Storage System V200R002C00 Parts Replacement or OceanStor 18500&18800&18800F Storage System V100R001 Parts Replacement.

    • If yes, no further action is required.
    • If no, go to step 4.

  4. Replace the interface module where the port resides and the interface module where the peer port resides in sequence. Perform the check again to determine whether the check is passed.

    • If yes, no further action is required.
    • If no, go to step 5.

  5. If you have any questions, contact Huawei technical support engineers.
Parent topic: Software Status
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.