Checking Interface Module Faults

Prerequisites

  • The replacement components are ready.
  • The interface module that you want to replace has been located.
    NOTE:
    You can locate the components in either of the following ways:
    • Check and record the location of the replacement components in the Device View of the management software. You are advised to light the location indicators of the components (for details, see the online help of the management software).
    • Locate the faulty components based on the location indicators.
  • Services running on the interface module that you want to replace have been stopped.
  • The cable connection positions of the interface module that you want to replace are labeled on the cables.

Precautions

  • Remove and insert an interface module with even force. Excessive force may damage the appearance or connectors of the interface module.
  • You are advised to replace an interface module within the shortest time possible.
  • Wait at least 15 seconds, and insert the interface module after removing the module.

Applicable to S2600T/S5500T V200R002

  1. Replace the interface module.

    For S2600T/S5500T, see Replacing an Interface Module (Applicable to S2600T/S5500T) in OceanStor S2600T&S5500T&S5600T&S5800T&S6800T Storage System V200R002C00 Parts Replacement.

    Then log in to the DeviceManager to check whether the alarm is cleared.

    • If yes=>no further action is required.
    • If no=>2.

  2. Collect related information and contact technical support engineers.

Applicable to S5600T/S5800T/S6800T V200R002

  1. Replace the interface module.

    For S5600T/S5800T/S6800T, see Replacing an Interface Module (Applicable to S5600T/S5800T/S6800T) in OceanStor S2600T&S5500T&S5600T&S5800T&S6800T Storage System V200R002C00 Parts Replacement.

    Then log in to the DeviceManager to check whether the alarm is cleared.

    • If yes=>no further action is required.
    • If no=>2.

  2. Collect related information and contact technical support engineers.

Applicable to 18500/18800/18800F/HVS85T/HVS88T V100R001

  1. Replace the interface module.

    For 18500/18800/18800F/HVS85T/HVS88T, see Replacing an Interface Module (Applicable to 18500/18800/18800F/HVS85T/HVS88T) in OceanStor 18500&18800&18800F Storage System V100R001 Parts Replacement.
    NOTE:
    The way to replace the parts of 18500/18800/18800F/HVS85T/HVS88T is the same as S5600T/S5800T/S6800T.

    Then log in to the DeviceManager to check whether the alarm is cleared.

    • If yes=>no further action is required.
    • If no=>2.

  2. Collect related information and contact technical support engineers.
Parent topic: Hardware Status
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.