Checking the Hotspare

Procedure

1. Check whether an alarm is displayed indicating that a disk is removed from the disk domain (ID: 0x100F00A0010).

   For details about how to view an alarm on the DeviceManager, see Checking System Alarms.

   • If yes, reinsert the removed disk and go to step 2.
   • If no, go to step 3.

2. Perform the check again to observe whether the check item fails.
   • If yes, go to step 3.
   • If no, no further action is required.

3. Check whether an alarm is displayed indicating that a disk in the disk domain is abnormal (fault alarm ID: 0xF00A0001, imminent-fault alarm ID: 0xF00A0003, slow-disk alarm ID: 0xF00A000D or 0xF000A005F).
   • If yes, replace the faulty disk.
   • If no, go to step 4.
   NOTE:

   For details about how to replace a disk module

   • 18500 V3&18800 V3, see section Replacing a Disk Module in the OceanStor 18500 V3&18800 V3 Product Documentation. The method used to replace disk modules is the same for V300R003 and V300R005. V300R003 is used as an example to describe how to replace a disk, see Replacing a Disk Module (24-Slot) and Replacing a Disk Module (25-Slot).
   • 2200 V3&2600 V3&5300 V3&5500 V3&5600 V3&5800 V3&6800 V3, see section Replacing a Disk Module in the OceanStor 5300 V3&5500 V3&5600 V3&5800 V3&6800 V3 Product Documentation or OceanStor 2200 V3&2600 V3&5300 V3&5500 V3&5600 V3&5800 V3&6800 V3 Product Documentation. The method used to replace disk modules is the same for V300R003 and V300R005. V300R003 is used as an example to describe how to replace a disk, see
     • 2U Controller Enclosure Replacing a Disk Module (12-Slot) and Replacing a Disk Module (25-Slot).
     • Disk Enclosure Replacing a Disk Module (24-Slot) and Replacing a Disk Module (25-Slot).
     • High-Density Disk Enclosure Replacing a Disk Module (12-Slot).
   • Dorado5000 V3&Dorado6000 V3, see section Replacing a Disk Module in the OceanStor Dorado5000 V3&Dorado6000 V3 Product Documentation.

4. Collect related information and contact technical support engineers.