Checking Interface Module Faults

Prerequisites

  • The replacement components are ready.
  • The interface module that you want to replace has been located.
    NOTE:
    You can locate the components in either of the following ways:
    • Check and record the location of the replacement components in the Device View of the management software. You are advised to light the location indicators of the components (for details, see the online help of the management software).
    • Locate the faulty components based on the location indicators.
  • Services running on the interface module that you want to replace have been stopped.
  • The cable connection positions of the interface module that you want to replace are labeled on the cables.

Precautions

  • Remove and insert an interface module with even force. Excessive force may damage the appearance or connectors of the interface module.
  • You are advised to replace an interface module within the shortest time possible.
  • Wait at least 15 seconds, and insert the interface module after removing the module.

Procedure

  1. Replace the interface module.

    NOTE:
    For details about how to replace an interface module
    • 18500 V3&18800 V3, see section Replacing an Interface Module in the OceanStor 18500 V3&18800 V3 Product Documentation . The method used to replace interface module is the same for V300R003 and V300R005. V300R003 is used as an example to describe how to replace an interface module, see Replacing an Interface Module.
    • 2200 V3&2600 V3&5300 V3&5500 V3&5600 V3&5800 V3&6800 V3, see section Replacing an Interface Module in the OceanStor 5300 V3&5500 V3&5600 V3&5800 V3&6800 V3 Product Documentation or OceanStor 2200 V3&2600 V3&5300 V3&5500 V3&5600 V3&5800 V3&6800 V3 Product Documentation. The method used to replace interface module is the same for V300R003 and V300R005. V300R003 is used as an example to describe how to replace an interface module, see
    • Dorado5000 V3&Dorado6000 V3, see section Replacing an Interface Module in the OceanStor Dorado5000 V3&Dorado6000 V3 Product Documentation.

    Then log in to the DeviceManager to check whether the alarm is cleared.

    • If yes=>no further action is required.
    • If no=>2.

  2. Collect related information and contact technical support engineers.
Parent topic: Hardware Status