Checking the Status of a Consistency Group

Procedure

1. Check whether an alarm (ID: 0xF0E10001) is displayed indicating that a link between storage arrays is faulty.

   For details about how to view an alarm on the DeviceManager, see Checking System Alarms.

   • If yes, go to step 2.
   • If no, go to step 3.

2. Clear the link fault alarm with recommended actions. Check whether Health Status of the consistency group is Normal.
   • If yes, no further action is required.
   • If no, go to step 3.

3. Check whether the storage pools where the primary and secondary LUNs of the remote replication members in the consistency group reside is faulty.

   On the CLI, run the show storage_pool general command to check whether Health Status is Fault.

   
   • If yes, go to step 4.
   • If no, go to step 5.

4. Clear the storage pool fault alarm with recommended actions.

   On the CLI, run the show consistency_group general command to check whether Health Status of the consistency group is Normal.

   
   • If yes, no further action is required.
   • If no, go to step 5.

5. Check whether the primary and secondary LUNs of the consistency group remote replication members are in normal state.
   • If yes, go to step 7.
   • If no, go to step 6.

6. Clear the LUN fault alarm with recommended actions. Check whether Health Status of the consistency group is Normal.
   • If yes, no further action is required.
   • If no, go to step 7.

7. Collect related information and contact technical support engineers.