Checking the Health Degree of a Disk

Procedure

1. On the CLI, run the show disk health command to check whether the Health Mark is less than or equal to 60.

   

   • If yes, go to step 2.
   • If no, no further action is required.

2. Replace the faulty disk and perform the check again to observe whether the check item fails.
   NOTE:

   For details about how to replace a disk module, click the following link:

   • For S2600T/S5500T, see Replacing a Disk Module (12-Slot) and Replacing a Disk Module (24-Slot) in OceanStor S2600T&S5500T&S5600T&S5800T&S6800T Storage System V200R002C00 Parts Replacement .
   • For S5600T/S5800T/S6800T, see Replacing a Disk Module (Applicable to S5600T/S5800T/S6800T) in OceanStor S2600T&S5500T&S5600T&S5800T&S6800T Storage System V200R002C00 Parts Replacement .
   • For 18500/18800/18800F/HVS85T/HVS88T, see Replacing a Disk Module (Applicable to 18500/18800/18800F/HVS85T/HVS88T) in OceanStor 18500&18800&18800F Storage System V100R001 Parts Replacement .
     NOTE:

     The way to replace the parts of 18500/18800/18800F/HVS85T/HVS88T is the same as S5600T/S5800T/S6800T.
   • If yes, go to step 3.
   • If no, no further action is required.

3. Collect related information and contact technical support engineers.