Creating a Recovery Plan

When you use the array snapshot DR technology to protect service data, you can create a recovery plan based on the protected groups that you have created on eReplication and implement one-click data rollback based on the recovery plan.

Prerequisites

Protected groups have been created and are not used in any recovery plan.
Protected groups to be enabled are not in the Invalid state.

Context

In the Air Gap snapshot copy recovery scenario, the replication port of the Air Gap backup storage is automatically enabled and disabled before and after the recovery process. You need to manually control firewall connectivity before triggering copy restoration. The link control of the recovery process and protection process does not affect functions of each other.
In the Air Gap snapshot copy recovery scenario, the Air Gap replication relationship needs to be reversed to ensure that the snapshot rollback process is normal. If other HyperMetro or replication relationships exist on the primary end of the Air Gap replication relationship, you need to manually split or reverse the pairs.

Procedure

On the menu bar, select Utilization > Data Restore.
Click Create.
The Create Data Restore Plan page is displayed.

Set Name and Description of the protected group. Table 1 describes related parameters.

**Table 1** Recovery plan parameters
Parameter	Description	Value
Name	Name of a recovery plan to be created.	[Value range] Contains 4 to 32 characters. Contains letters, digits, underscores (_), and hyphens (-), and cannot start with a hyphen (-). [Example] plan
Description	Description of the recovery plan.	[Value range] Contains 0 to 255 characters. [Example] Recovery plan

Click OK.