After a data cluster module is added, it is connected to the storage system and detects hardware of the storage system. When it detects a risk, it reports an alarm. You can view alarms reported by the data cluster module on DeviceManager. Some hardware models do not support this function. For details about hardware models that support this function, see Product Description published on the technical support website or consult your product provider.
Prerequisites
- You have obtained the management IP address of the data cluster modules as well as the user name and password for logging in to a data cluster module.
Procedure
- Choose Cluster > Cluster > Hardware.
- In the lower part of the function pane, click the Data Cluster Modules tab.
- Add a data cluster module.
- Click Add.
The Add Data Cluster Module page is displayed.
- Enter information about the data cluster module. Table 1 describes related parameters.
Table 1 Data cluster module parameters Parameter
Description
Management IP Address
Management IP address of the data cluster module. You can log in to the data cluster module management system through this IP address.
Username
User name for logging in to the data cluster module.
Password
Password for logging in to the data cluster module.
- Click OK.
If the fan or power supply of the data cluster module is faulty, a corresponding alarm will be reported on the Data Cluster Module Alarms page. To view the alarm, choose Monitor > Alarms and Events > Alarms or Monitor > Alarms and Events > Data Cluster Module Alarms.
- Click Add.
- Modify login information about the data cluster module. If the user name or password of the data cluster module changes, synchronize the change on DeviceManager.
- Select the desired data cluster module and click Modify.
The Modify Data Cluster Module page is displayed.
You can also click More on the right of a desired data cluster module and select Modify.
- Change the user name, password, or chassis of the data cluster module.
When changing the chassis of a data cluster module, you also need to change the chassis of the other data cluster module in the same chassis.
- Click OK.
- Select the desired data cluster module and click Modify.
- If a data cluster module is no longer needed, select it and click Delete to delete it.
You can also click More on the right of a desired data cluster module and select Delete.
Follow-up Procedure
After the data cluster module is successfully connected to the storage system, you can choose Monitor > Alarms and Events > Data Cluster Module Alarms to view the reported alarms.