Modifying a Snapshot Schedule

Prerequisites

A snapshot schedule has been created, and its status is disabled.

Procedure

1. Choose Data Protection > Plans > Snapshot Schedule > Schedule.
2. Select the desired account from the Account drop-down list in the upper left corner.
3. Click More on the right of a desired snapshot schedule and select Modify.

   The Modify Snapshot Schedule page is displayed.

4. Modify the basic information about the snapshot schedule.

   Table 1 describes the parameters.

   Table 1 Basic parameters of a snapshot schedule

   Parameter	Description
   Name	Name of the snapshot schedule. NOTE: The name must not be empty and must be unique. The name can contain only letters, digits, underscores (_), periods (.), and hyphens (-). The name can contain 1 to 255 characters.
   Description	Description of the snapshot schedule. NOTE: The value can be left blank or contain up to 255 characters.

5. Set an execution policy for the snapshot schedule based on service requirements.

   The storage system supports four configuration modes, which can be executed concurrently.

   • Create scheduled snapshots based on a fixed period.
     1. Set a fixed period.
        • If you set the schedule by hour, the value ranges from 1 to 24. By default, the snapshot schedule is executed every hour.
        • If you set the schedule by minute, the value ranges from 60 to 1440.
     2. In the Retention Policy area, set a retention policy for scheduled snapshots. You can set either a retention period or the number of objects you want to retain.
        • Retain For

          In this area, you can set a retention period for scheduled snapshots. The value must be an integral multiple of the fixed period.

        • Retained Objects

          In this area, you can set the number of snapshots to be retained for each member in the snapshot schedule. The value ranges from 1 to 4096.

          

          You do not need to set Retain For and Retained Objects simultaneously. Because once you set one parameter, the system will automatically calculate the value of the other parameter.

   • Create scheduled snapshots at specified time points every day.
     1. Set the time points at which the snapshot schedule is executed every day. The value ranges from 00:00 to 23:59 in the time zone where the storage device is located.
     2. In Retained Objects per Member, set the number of snapshots to be retained for a single member in the snapshot schedule. The value ranges from 1 to 256.
   • Create scheduled snapshots at specified time points every week.
     1. Set the time points at which the snapshot schedule is executed every week. The value ranges from 00:00 on Monday to 23:59 on Sunday in the time zone where the storage device is located.
     2. In Retained Objects per Member, set the number of snapshots to be retained for a single member in the snapshot schedule. The value ranges from 1 to 256.
   • Create scheduled snapshots at specified time points every month.
     1. Set the time points at which the snapshot schedule is executed every month. The value ranges from 00:00 on the first day of each month to 23:59 on the last day of each month in the time zone where the storage device is located.
     2. In Retained Objects per Member, set the number of snapshots to be retained for a single member in the snapshot schedule. The value ranges from 1 to 256.

6. Confirm the modified information about the snapshot schedule and click OK.
7. Confirm your operation as prompted.