This operation enables you to cancel locating a disk. After canceling locating a disk, its indicator is off.
Prerequisites
- A disk supports the location indicator function and its Location Indicator Status is Enabled.
- The Locate Disk and Cancel Locating functions are supported only when dedicated hardware is used or the RAID controller card type is SAS3008, SAS3108, SAS3408, SAS3416, SAS3508, SAS2208, SAS3152, or SAS3908.
Procedure
- Choose Cluster > Cluster > Hardware.
- In the lower part of the function pane, click the Disks tab.
- Select one or more desired disks and click Cancel Locating.
You can also click More on the right of a desired disk and select Cancel Locating.