Modifying a DNS

Procedure

1. Choose Settings > Object Service Settings > DNS > Object Service.
2. Click More on the right of the desired DNS and select Modify.
3. Modify the DNS parameters. Table 1 describes related parameters.

   Table 1 DNS parameters

   Parameter	Description
   Monitoring IP Address	Indicates the IP address to be monitored. [Value range] The value can be an IPv4 or IPv6 address.
   Service Address	Indicates the IP address used to provide services for external systems. [Value range] When Service Type is set to OSC, the value can be an IPv4 address or domain name. A domain name contains 3 to 253 characters, including letters, digits, and hyphens (-) and cannot start or end with a hyphen (-). The domain name must contain a second-level domain name. Each sub-domain name contains 1 to 63 characters and is separated from each other using periods (.). The top-level domain name cannot contain digits only. When Service Type is set to POE, LS, or REP, the value can be an IPv4 address.
   Resource	The default value is 1 and does not need to be modified.

4. Click OK.