This operation enables you to locate a disk. After a disk is located, its indicator is on.
Prerequisites
- A disk supports the location indicator function and its Location Indicator Status is Disabled.
- The location indicator function is only supported by a storage system whose RAID controller card type is SAS3008, SAS3108, SAS3408, SAS3416, SAS3508, SAS2208, or SAS3152.
Procedure
- Choose Cluster > Cluster > Hardware.
- In the lower part of the function pane, click the Disks tab.
- Select one or more desired disks and click Locate Disk.
You can also click More on the right of a desired disk and select Locate Disk.