Managing a Port Pool

Procedure

1. Choose Resources > Access > Service Network.
2. Select the desired account and subnet from the Account and Subnet drop-down lists, respectively.
3. Click More on the right of a desired zone and select Port Pool.

   The Port Pool page is displayed.

4. Configure the port pool.
   • Adding a port
     1. Click Add.

        The Add Port page is displayed.

     2. Select the ports planned for service network communication. You can select a single port or bond ports. To add or modify bond ports, click Manage Service Bond Port on the displayed page.
        

        You are advised to select bond ports.

     3. (Optional) Manage service bond ports.
        1. Click Manage Service Bond Port.

           The Manage Service Bond Port page is displayed.

        2. Create a port.
           1. Click Create.

              The Create Bond Port page is displayed.

           2. Configure the bond port information. Table 1 describes related parameters.

              Table 1 Bond port parameters

              Parameter	Description
              Bond Port Name	Name of the bond port.
              Transmission Protocol	Transmission protocol of the bond port. Possible options are TCP and IB.
              Physical Port	Physical port to be bound.
              Bond Mode	Port bond mode. When Transmission Protocol is set to TCP, bond1 and bond4 are supported. When Transmission Protocol is set to IB, only bond1 is supported. bond1: active/standby mode bond4: dynamic link aggregation mode
              MTU (Bytes)	Maximum transmission unit of the bond port.

           3. Click OK.
        3. Delete a bond port.

           Click More on the right of a desired bond port and select Delete.

        4. Click Close.
     4. Click OK.
   • Removing a port
     Select one or more desired ports and click Remove.

     

     You can also click More on the right of a desired port and select Remove.

   • Enabling or disabling the DNS service

     Click More on the right of a desired port and select Enable DNS Service or Disable DNS Service.

5. Click Close.