Modifying a Migration Policy

Precautions

• For a directory, if it is created with a policy, such policy is applied preferentially. If the directory is not created with a policy, it inherits the policy created for its parent directory.

• If Tier Grade is Heterogeneous device and the filter policy type is Custom, you are advised to select By file operation time and set required time parameters to be greater than 90 days (smaller than 30 days is not recommended).
• If Tier Grade is Heterogeneous device, the filter policy type is Custom, Migration Policy for Object Versions is enabled, and Current Version > By days after creation are selected, you are advised to set the time to be greater than 90 days (smaller than 30 days is not recommended).

Procedure

1. Choose Resources > Tuning > SmartTier > Migration Policy.
2. Select a desired account from the Account drop-down list in the upper left corner.
3. Select a desired file directory from the list on the left. Migration policies created for the file directory are displayed in the function pane on the right. Click More on the right of a desired migration policy and select Modify.

   The Modify Migration Policy page is displayed.

4. Modify information about the migration policy.
   Table 1 describes related parameters.

   Table 1 Migration policy parameters

   Parameter

   Description

   Scenario-Specific SmartCompression Mode

   Whether to compress or decompress specified files based on scenarios. None: Files are not compressed or decompressed. Compression: compresses specified files. The files after compression occupy less space but cannot be read or written. Decompression: decompresses the compressed files. The files after decompression are restored to the original size and can be read and written. NOTE: If Execution Mode is set to Periodical, Decompression cannot be selected. If you set Execution Mode to Periodical, the periodical policy also takes effect for compression tasks. For a migration policy with Execution Mode set to Periodical, if you switch the scenario-specific SmartCompression mode from None to Compression, the new mode takes effect only for files modified after the configuration. If old files need to be compressed, you need to configure a one-off compression policy to perform full scanning and compression. When Service Type is set to General, scenario-specific SmartCompression modes can be configured only after an advanced license is imported. When Service Type is set to Intelligent video and image or Media, no scenario-specific SmartCompression mode can be configured. When Tier Grade is set to Heterogeneous device, Scenario-Specific SmartCompression Mode is automatically set to None and cannot be manually modified.

5. Set a filtering policy. Table 2 describes related parameters.
   

   • Intelligent tiering and Custom cannot be selected at the same time. If you select Custom, you can combine the parameters in Custom to configure the policy. The migration policy takes effect for files that meet all the filtering parameters.
   • If no filtering policy is set, the migration policy takes effect for all files in the selected path.
   • When Execution Mode is set to One-off, the policy type can only be Custom.

   Table 2 Filtering policy parameters

   Policy Type	Description
   Intelligent tiering	The system executes the migration task by identifying hot and cold files based on attributes such as file access frequency, operation time, and file sizes. If you select Intelligent tiering, only files whose hot and cold grades match the tier grade can be migrated.
   Custom	By file name Select Including or Excluding in File Name Filtering to determine whether files with specified names are included or excluded in the policy. Then, specify the file names to be filtered for or filtered. NOTE: In the text box, 1 to 1023 characters can be entered. Wildcard (*) can match any character. The following formats are supported: example, *, *example*, *example, example*, and example*example. Multiple file names are separated using commas (,). By file size Specify the size of files to be filtered for. By file operation time Specify a specific operation time. The options are crtime, mtime, ctime, and atime. crtime: indicates the file creation time. mtime: indicates the file modification time. ctime: indicates the file property modification time. atime: indicates the last file access time. NOTE: If the object protocol is enabled for the selected namespace, the crtime parameter is not supported. By user or user group Select the type of the desired user or user group from the User or User Group Type drop-down list and then select Including or Excluding in User Name Filtering to determine whether files of the specified user or user group are included or excluded in the policy. If you select LDAP domain user, LDAP domain user group, NIS domain user, or NIS domain user group in User or User Group Type, specify the user or user group name in Username or User Group Name. If you select Local UNIX authentication user or Local UNIX authentication user group, click Select next to Username or User Group Name. On the Local UNIX Authentication User or Local UNIX Authentication User Group page that is displayed, select the desired user or user group and click OK. By prefix Specify a specific prefix. By tag Specify a specific tag. You can click to add multiple tags. NOTE: If you select Custom, you can set the filtering policy to the By prefix or By tag type only when the object protocol is enabled for the selected namespace. It is recommended that the ≤ condition of the file operation time be used together with other time policies. For example: Set crtime to >, 7, and days, and atime to ≤, 1, and days. That is, the files that are created one week ago and accessed in the last day are migrated. After a migration task is started, files in the directories for which migration policies have been configured are migrated one by one. Whether a file meets the conditions is determined during file processing. To prevent a condition from changing with the task execution time (for example, the value of crtime is set to ≤, 1, and hours when the task is started but the value of crtime changes to >, 1, and hours when the file is being processed), set the condition value of ≤ to the one greater than the migration period in Setting a Migration Period.

6. If the object protocol is enabled for the selected namespace, you can set the object version migration policy.
   1. Enable Migration Policy for Object Versions.
   2. Set an object version migration policy. Table 3 describes related parameters.

      Table 3 Object version migration policy parameters

      Parameter	Description
      Current version	Set a migration policy for objects of the current version. Possible options are By days after creation and By specified date. By days after creation When you select By days after creation, objects of the current version will be migrated after being created for the specified number of days. The value ranges from 1 to 1096 days. By specified date If the specified date is earlier than or is the current date, objects of the current version uploaded earlier than the specified date will be migrated. If the specified date is later than the current date, objects of the current version uploaded earlier than the specified date will be migrated after the specified date is reached. This option applies to policies whose execution mode is Periodical.
      Noncurrent version	Set a migration policy for objects of noncurrent version. Objects will be migrated after becoming noncurrent version for the specified number of days. The value ranges from 1 to 1096 days.

      

      The migration policy takes effect for files that meet all filter policies and object version migration policies.

7. Select a storage type.
   1. Select a tier grade for the migration policy. Possible options include:
      • Cold, Warm, and Hot: the grade of the disk pool to which files are migrated. A disk pool's tier grade is specified during disk pool creation.
      • Heterogeneous device: If tiered storage is enabled for the selected namespace, you can migrate files to other heterogeneous devices.
      

      • Heterogeneous device can be selected only when Tiered Storage is enabled for the selected namespace and a heterogeneous device is bound to the namespace.
      • If the current tier grade of the migration policy is Cold, Warm, or Hot, you can modify the tier grade. If the tier grade of the migration policy is modified to Heterogeneous device, you can also select a migration type.
      • If the current tier grade of the migration policy is Heterogeneous device and the migration type is Migrate to a heterogeneous device, the tier grade can only be modified to Cold, Warm, or Hot.
      • If the current tier grade of the migration policy is Heterogeneous device and the migration type is Retrieve from a heterogeneous device, you cannot modify the tier grade and migration type.
   2. When Tier Grade is set to Heterogeneous device, you need to set migration parameters. Table 4 describes related parameters.

      Table 4 Heterogeneous device migration parameters

      Migration Type	Associated Parameter	Description
      Migrate to a heterogeneous device	Compression	After this function is enabled, files to be migrated will be compressed before being stored on the heterogeneous device.
      	Aggregation	After this function is enabled, small files will be aggregated before being stored on the heterogeneous device.
      	Data Encryption	After this function is enabled, software-based encrypted files will be stored in ciphertext on the heterogeneous device. NOTE: Before enabling the data encryption function, enable the data encryption function for the account. Data encryption cannot be enabled when a migration policy is configured for a cross-site DR replication bucket.
      Retrieve from a heterogeneous device	Retention Period After Retrieval	Retention duration for files retrieved from the heterogeneous device. If no modification is made to the file data, after the retention period expires, the local data is deleted and the data on the heterogeneous device is retained. Otherwise, the data on the heterogeneous device is deleted, and the local data is retained. NOTE: Retrieve from a heterogeneous device is available only when Execution Mode is set to One-off. If the Task Status for retrieving data back from a heterogeneous device is Failed, generally it is because the heterogeneous device fails to be connected. For example, the network connection is abnormal, the network is unstable, or the heterogeneous device's bucket associated with the namespace is deleted, or you do not have the permission to access the bucket.

8. Click OK.