Modifying a Subnet

Procedure

1. Choose Services > File Service > Service Network.
2. Click More on the right of the desired subnet and select Modify.

   The Modify Subnet page is displayed.

3. Set basic information about the subnet.

   Table 1 describes related parameters.

   Table 1 Subnet parameters

   Parameter	Description
   DNS	You are advised to enable DNS. After this function is enabled, you need to set a sub-domain name in the zone. Then, the file service can be accessed through the sub-domain name.
   IP Address of DNS Service in Subnet	This parameter is available only when DNS is enabled.
   Subnet Root Domain Name	This parameter is available only when DNS is enabled.

4. Click OK.
5. Confirm your operation as prompted.