Managing a Port Pool

Procedure

1. Choose Services > File Service > Service Network.
2. Click More on the right of the desired zone and select Port Pool.

   The Port Pool page is displayed.

3. Configure the port pool.
   • Adding a port
     1. Click Add.

        The Add Port page is displayed.

     2. Select the ports to be added.
        

        You are advised to select bond ports.

     3. (Optional) Manage bond ports.
        1. Click Manage Service Bond Port.

           The Manage Service Bond Port page is displayed.

        2. Add a bond port.
           1. Click Add.

              The Create Bond Port page is displayed.

           2. Configure the bond port information. Table 1 describes related parameters.

              Table 1 Bond port parameters

              Parameter	Description
              Bond Port Name	Indicates the name of the bond port.
              Transmission Protocol	Indicates the transmission protocol of the bond port.
              Physical Port	Indicates the physical port to be bound.
              Bond Mode	Indicates the bond mode. bond1: active/standby mode bond4: dynamic link aggregation mode NOTE: bond4 is recommended.
              MTU (Bytes)	Indicates the maximum transmission unit of the bond port.

           3. Click OK.
        3. Delete a bond port.

           Click More on the right of the desired bond port and select Delete.

     4. Click OK.
   • Removing a port
     Select one or more desired ports and click Remove.

     

     You can also click More on the right of a desired port and select Remove.

4. Click Close.