Creating a Global Zone

Context

Only one Global zone can be created.

Procedure

1. Choose Services > HDFS Service > Service Network.
2. Click Create Global Zone.

   The Create Zone page is displayed.

3. Configure basic zone information.

   Table 1 describes related parameters.

   Table 1 Basic zone parameters

   Parameter	Description
   Sub-domain Name	Indicates the sub-domain name of the zone. This function must be used together with the DNS function in the subnet.
   DNS Policy	Indicates the DNS policy of the zone. Possible options are as follows: Round robin If clients access services using domain names, nodes are selected to process service requests of clients based on the sequence recorded in the cache. Node connections If clients access services using domains names, nodes with the fewest connections are selected to process service requests of clients. CPU usage If clients access services using domains names, nodes with the lowest CPU usage are selected to process service requests of clients. Node throughput If clients access services using domains names, nodes with the lowest throughput are selected to process service requests of clients.
   DNS Service	Indicates whether to enable the DNS service to resolve the sub-domain name of the Global zone. After enabling DNS for the subnet, setting a sub-domain name for the Global zone, and enabling DNS for the Global zone, the HDFS service of the Global zone can be accessed through the sub-domain name.

   

   You are not advised to enable IP Address Failover for the Global zone. You can configure this function on the CLI as required.

4. Click Next.
5. Configure the IP address pool.
   • Adding an IP address
     1. Click Add.

        The Add IP Address page is displayed.

     2. Configure IP address information.

        Table 2 describes related parameters.

        Table 2 IP address parameters

        Parameter	Description
        Type	Indicates the IP address adding type. The value can be Single Address or Address Segment.
        IP Address/Mask	The value is the planned service IP address and subnet mask when Type is set to Single Address.
        Start IP Address/Mask	The value is the planned start service IP address and subnet mask when Type is set to Address Segment.
        End IP Address/Mask	The value is the planned end service IP address and subnet mask when Type is set to Address Segment.

     3. Click OK.

6. Click Next.
7. Configure the port pool.
   1. Click Add.

      The Add Port page is displayed.

   2. Select the ports to be added.
      

      You are advised to select bond ports.

   3. (Optional) Manage bond ports.
      1. Click Manage Bond Port.

         The Manage Bond Port page is displayed.

      2. Click Add.

         The Create Bond Port page is displayed.

      3. Configure the port information. Table 3 describes related parameters.

         Table 3 Port parameters

         Parameter	Description
         Bond Port Name	Indicates the name of the bond port.
         Transmission Protocol	Indicates the transmission protocol of the bond port. The HDFS service network supports only TCP.
         Physical Port	Indicates the physical port to be bound.
         Bond Mode	Indicates the bond mode. The HDFS service network supports only bond4. bond4: dynamic link aggregation mode
         MTU (Bytes)	Indicates the maximum transmission unit of the bond port.

      4. Click OK.
   4. Click OK.

8. Click OK.