openapi_logging.h File Reference

#include "openapi_common.h"

Go to the source code of this file.

Data Structures
struct	openapiTrapLogEntry_t

Macros
#define	OPENAPI_LOG_ENTRY_BUF_SIZE   (OPENAPI_LOG_FORMAT_BUF_SIZE + 80)
#define	OPENAPI_LOG_FORMAT_BUF_SIZE   512
#define	OPENAPI_TRAP_ENTRY_SIZE   (300)
#define	OPENAPI_TRAP_LOG_BUF_SIZE   (256 * sizeof(openapiTrapLogEntry_t))

Enumerations
enum	OPEN_LOG_SEVERITY_t {   OPEN_LOG_SEVERITY_UNDEFINED = -1, OPEN_LOG_SEVERITY_EMERGENCY = 0, OPEN_LOG_SEVERITY_ALERT = 1, OPEN_LOG_SEVERITY_CRITICAL = 2,   OPEN_LOG_SEVERITY_ERROR = 3, OPEN_LOG_SEVERITY_WARNING = 4, OPEN_LOG_SEVERITY_NOTICE = 5, OPEN_LOG_SEVERITY_INFO = 6,   OPEN_LOG_SEVERITY_DEBUG = 7 }
	OpEN uses this enumeration to define Logging Severity Levels. More...

Functions
open_error_t	openapiBufferedLogClear (openapiClientHandle_t *client_handle)
	Clear the content of the buffered messages log.
open_error_t	openapiBufferedLogEntryNextGet (openapiClientHandle_t *client_handle, uint32_t *logIndex, open_buffdesc *logEntry)
	Get the next entry in the in-memory (buffered) message log.
open_error_t	openapiCliCmdLoggingModeGet (openapiClientHandle_t *client_handle, OPEN_CONTROL_t *cmdLoggingMode)
	Get CLI command logging mode.
open_error_t	openapiCliCmdLoggingModeSet (openapiClientHandle_t *client_handle, OPEN_CONTROL_t cmdLoggingMode)
	Enable or disable CLI command logging.
open_error_t	openapiConsoleLoggingModeGet (openapiClientHandle_t *client_handle, OPEN_CONTROL_t *loggingConsoleMode)
	Get Console Logging mode.
open_error_t	openapiConsoleLoggingModeSet (openapiClientHandle_t *client_handle, OPEN_CONTROL_t loggingConsoleMode)
	Set Console Logging mode.
open_error_t	openapiConsoleLoggingSeverityGet (openapiClientHandle_t *client_handle, OPEN_LOG_SEVERITY_t *severityLevel)
	Get Console Logging severity level.
open_error_t	openapiConsoleLoggingSeveritySet (openapiClientHandle_t *client_handle, OPEN_LOG_SEVERITY_t severityLevel)
	Set Console Logging severity level.
open_error_t	openapiLoggingHostAdd (openapiClientHandle_t *client_handle, open_buffdesc *loggingHost)
	Add a logging host.
open_error_t	openapiLoggingHostIpAddrNextGet (openapiClientHandle_t *client_handle, open_buffdesc *loggingHost)
	Get logging host IP address.
open_error_t	openapiLoggingHostMaxAddrLenGet (openapiClientHandle_t *client_handle, uint32_t *logHostMaxAddrLen)
	Get the maximum length of logging host address.
open_error_t	openapiLoggingHostPortGet (openapiClientHandle_t *client_handle, open_buffdesc *loggingHost, uint16_t *port)
	Get logging host port.
open_error_t	openapiLoggingHostPortSet (openapiClientHandle_t *client_handle, open_buffdesc *loggingHost, uint32_t port)
	Set port number to the logging host.
open_error_t	openapiLoggingHostRemove (openapiClientHandle_t *client_handle, open_buffdesc *loggingHost)
	Remove a logging host entry.
open_error_t	openapiLoggingHostSeverityGet (openapiClientHandle_t *client_handle, open_buffdesc *loggingHost, OPEN_LOG_SEVERITY_t *severityLevel)
	Get logging host severity level.
open_error_t	openapiLoggingHostSeveritySet (openapiClientHandle_t *client_handle, open_buffdesc *loggingHost, OPEN_LOG_SEVERITY_t severityLevel)
	Set severity level to the logging host.
open_error_t	openapiMaxLoggingHostsSupportedGet (openapiClientHandle_t *client_handle, uint32_t *maxLoggingHosts)
	Get the maximum logging hosts supported.
open_error_t	openapiPersistentLoggingModeGet (openapiClientHandle_t *client_handle, OPEN_CONTROL_t *loggingPersistentMode)
	Get the persistent logging mode.
open_error_t	openapiPersistentLoggingModeSet (openapiClientHandle_t *client_handle, OPEN_CONTROL_t persistentLoggingMode)
	Set the persistent logging mode.
open_error_t	openapiPersistentLoggingSeverityLevelGet (openapiClientHandle_t *client_handle, OPEN_LOG_SEVERITY_t *severityLevel)
	Get the persistent logging severity level.
open_error_t	openapiPersistentLoggingSeverityLevelSet (openapiClientHandle_t *client_handle, OPEN_LOG_SEVERITY_t severityLevel)
	Set persistent logging severity level.
open_error_t	openapiSysLogModeGet (openapiClientHandle_t *client_handle, OPEN_CONTROL_t *sysLogMode)
	Get syslog mode.
open_error_t	openapiSysLogModeSet (openapiClientHandle_t *client_handle, OPEN_CONTROL_t sysLogMode)
	Set the syslog mode.
open_error_t	openapiSysLogPortGet (openapiClientHandle_t *client_handle, uint16_t *port)
	Get syslog port.
open_error_t	openapiSysLogPortSet (openapiClientHandle_t *client_handle, uint32_t port)
	Set syslog port.
open_error_t	openapiSysLogWrite (openapiClientHandle_t *client_handle, open_buffdesc *logMessage, OPEN_LOG_SEVERITY_t severityLevel)
	Write system log.
open_error_t	openapiTrapLogClear (openapiClientHandle_t *client_handle)
	Clear the content of the trap log.
open_error_t	openapiTrapLogGet (openapiClientHandle_t *client_handle, open_buffdesc *trapLogData, uint32_t *numberOfEntries)
	Retrieve the content of the trap log.