VLAN Configuration And Status [OPENAPI_VLAN]

Data Structures
struct	OPEN_VLAN_LIST_t

Macros
#define	OPEN_DOT1Q_TAGGED   1
#define	OPEN_DOT1Q_UNTAGGED   0
#define	OPEN_VLAN_LIST_MAX_ENTRIES   4096
	VLAN list.

Enumerations
enum	OPEN_DOT1Q_PVLAN_PORT_TYPE_t { OPEN_PRIVATE_VLAN_UNCONFIGURED_PORT, OPEN_PRIVATE_VLAN_HOST_PORT, OPEN_PRIVATE_VLAN_COMMUNITY_PORT, OPEN_PRIVATE_VLAN_PROMISCOUS_PORT }
enum	OPEN_DOT1Q_PVLAN_TYPE_t { OPEN_PRIVATE_VLAN_UNCONFIGURED = 0, OPEN_PRIVATE_VLAN_PRIMARY, OPEN_PRIVATE_VLAN_SECONDARY_ISOLATED, OPEN_PRIVATE_VLAN_SECONDARY_COMMUNITY }
enum	OPEN_DOT1Q_SWPORT_MODE_t {   OPEN_DOT1Q_SWPORT_MODE_NONE = 0, OPEN_DOT1Q_SWPORT_MODE_GENERAL = 1, OPEN_DOT1Q_SWPORT_MODE_ACCESS = 2, OPEN_DOT1Q_SWPORT_MODE_TRUNK = 3,   OPEN_DOT1Q_SWPORT_MODE_PRIVATE_HOST = 4, OPEN_DOT1Q_SWPORT_MODE_PRIVATE_PROMISC = 5, OPEN_DOT1Q_SWPORT_MODE_PRIVATE_PROMISC_TRUNK = 6, OPEN_DOT1Q_SWPORT_MODE_PRIVATE_ISOLATED_TRUNK = 7,   OPEN_DOT1Q_SWPORT_MODE_AUTO_TRUNK = 8 }
	< Dot1q port modes. More...
enum	OPEN_DOT1Q_VLAN_TYPE_t {   OPEN_DOT1Q_VLAN_TYPE_NOT_PARTICIPATING, OPEN_DOT1Q_VLAN_TYPE_DEFAULT, OPEN_DOT1Q_VLAN_TYPE_ADMIN, OPEN_DOT1Q_VLAN_TYPE_GVRP_REGISTERED,   OPEN_DOT1Q_VLAN_TYPE_WS_L2_TNNL_REGISTERED, OPEN_DOT1Q_VLAN_TYPE_IP_INTERNAL_VLAN, OPEN_DOT1Q_VLAN_TYPE_AUTHMGR_REGISTERED, OPEN_DOT1Q_VLAN_TYPE_MVRP_REGISTERED,   OPEN_DOT1Q_VLAN_TYPE_OPENFLOW_REGISTERED, OPEN_DOT1Q_VLAN_TYPE_AUTO_VIDEO_REGISTERED, OPEN_DOT1Q_VLAN_TYPE_EVC_REGISTERED, OPEN_DOT1Q_VLAN_TYPE_PBB_REGISTERED }

Functions
open_error_t	openapiDot1qApiPrivateVlanAssocAdd (openapiClientHandle_t *client_handle, uint32_t vlanId, OPEN_VLAN_LIST_t vidList)
	Setup a VLAN bindings for private VLAN domain. More...
open_error_t	openapiDot1qApiPrivateVlanAssocRemove (openapiClientHandle_t *client_handle, uint32_t vlanId, OPEN_VLAN_LIST_t vidList)
	Remove VLAN bindings for private VLAN domain. More...
open_error_t	openapiDot1qIntfPVlanHostAssocSet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t primary_vlan, uint32_t sec_vlan)
	Set VLAN bindings for private VLAN interface. More...
open_error_t	openapiDot1qIntfPVlanPromiscAssocSet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t primary_vlan, OPEN_VLAN_LIST_t vidList)
	Set VLAN bindings for private VLAN interface. More...
open_error_t	openapiDot1qMaxSupportedVlansGet (openapiClientHandle_t *client_handle, uint32_t *val)
	Get dot1q Max Supported VLANs. More...
open_error_t	openapiDot1qOperAutoTrunkModeGet (openapiClientHandle_t *client_handle, uint32_t intIfNum, OPEN_BOOL_t *autoTrunkOperMode)
	Get the operational auto-trunk mode of the interface. More...
open_error_t	openapiDot1qPortIngressFiltering (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t *val)
	Get VLAN ingress filtering status per port. More...
open_error_t	openapiDot1qPrivateVlanAssociationGet (openapiClientHandle_t *client_handle, uint32_t vlanId, OPEN_VLAN_LIST_t *vidList)
	Get VLAN bindings for private VLAN domain. More...
open_error_t	openapiDot1qPrivateVlanEnable (openapiClientHandle_t *client_handle, uint32_t vlanId, OPEN_DOT1Q_PVLAN_TYPE_t pvlanType)
	Setup a VLAN as private VLAN. More...
open_error_t	openapiDot1qPrivateVlanGet (openapiClientHandle_t *client_handle, uint32_t vlanId, OPEN_DOT1Q_PVLAN_TYPE_t *pvlanType)
	Get the configured private VLAN type. More...
open_error_t	openapiDot1qPVlanIntfHostAssocRemove (openapiClientHandle_t *client_handle, uint32_t ifNum)
	Clear VLAN bindings for private VLAN interface. More...
open_error_t	openapiDot1qPVlanIntfPromiscAssocRemove (openapiClientHandle_t *client_handle, uint32_t ifNum)
	Clear VLAN bindings for private VLAN interface. More...
open_error_t	openapiDot1qRxPacketsNotForwardedCountGet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint64_t *totalRxPktsNotForwarded)
	Get the total number of received packets that are not forwarded of the interafce. More...
open_error_t	openapiDot1qSwPortAccessVlanGet (openapiClientHandle_t *client_handle, uint32_t intf, uint32_t *vlanId)
	Get the Access VLAN ID for a port. More...
open_error_t	openapiDot1qSwPortAccessVlanSet (openapiClientHandle_t *client_handle, uint32_t intf, uint32_t vlanId)
	Set the Access VLAN ID for a port. More...
open_error_t	openapiDot1qSwPortDynamicallyAddedVlanListGet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_VLAN_LIST_t *vidList)
	Get the dynamically added VLAN list for the interface when the interface is in general mode. More...
open_error_t	openapiDot1qSwPortForbiddenVlanListGet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_VLAN_LIST_t *vidList)
	Get the forbidden VLAN list for the interface when the interface is in general mode. More...
open_error_t	openapiDot1qSwPortModeGet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_DOT1Q_SWPORT_MODE_t *mode)
	Get the Switchport Configuration Mode for a port. More...
open_error_t	openapiDot1qSwPortModeSet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_DOT1Q_SWPORT_MODE_t mode)
	Set the Switchport Configuration Mode for a port. More...
open_error_t	openapiDot1qSwPortTaggedVlanListGet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_VLAN_LIST_t *vidList)
	Get the tagged VLAN list for the interface when the interface is in general mode. More...
open_error_t	openapiDot1qSwPortTrunkAllowedVlanListGet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_VLAN_LIST_t *vidList)
	Get the list of VLANs allowed on an interface when the interface is in trunking mode. More...
open_error_t	openapiDot1qSwPortTrunkAllowedVlanListSet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_VLAN_LIST_t *vidList)
	Set the list of VLANs allowed on an interface when the interface is in trunking mode. More...
open_error_t	openapiDot1qSwPortTrunkNativeVlanGet (openapiClientHandle_t *client_handle, uint32_t intf, uint32_t *vlanId)
	Get the Native VLAN ID for a port when in trunking mode. More...
open_error_t	openapiDot1qSwPortTrunkNativeVlanSet (openapiClientHandle_t *client_handle, uint32_t intf, uint32_t vlanId)
	Set the native VLAN ID for a port when in trunking mode. More...
open_error_t	openapiDot1qSwPortUntaggedVlanListGet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_VLAN_LIST_t *vidList)
	Get the untagged VLAN list for the interface when the interface is in general mode. More...
open_error_t	openapiDot1qVlanNumDeletesGet (openapiClientHandle_t *client_handle, uint32_t *val)
	Get the number of times a VLAN entry has been deleted from DOT1Q table. More...
open_error_t	openapiDynamicVlanEntriesGet (openapiClientHandle_t *client_handle, uint32_t *val)
	Get the number of dynamic VLANs. More...
open_error_t	openapiMostVlanEntriesGet (openapiClientHandle_t *client_handle, uint32_t *val)
	Get the max VLAN entries allowed. More...
open_error_t	openapiNextVlanGet (openapiClientHandle_t *client_handle, uint32_t vid, uint32_t *nextVid)
	Gets the next VLAN ID. More...
open_error_t	openapiPvlanIntfHostAssocGet (openapiClientHandle_t *client_handle, uint32_t intf, uint32_t *primaryVid, uint32_t *secondaryVid)
	Get the private VLAN association for a host mode interface. More...
open_error_t	openapiPvlanIntfIsolatedTrunkAssocNextGet (openapiClientHandle_t *client_handle, uint32_t intf, uint32_t primaryVid, uint32_t *nextPrimaryVid, uint32_t *secondaryVid)
	Get the next primary VLAN and any associated secondary VLAN for an isolated trunk interface in a private VLAN. More...
open_error_t	openapiPvlanIntfModeGet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_DOT1Q_SWPORT_MODE_t *mode)
	Get the private VLAN mode for an interface. More...
open_error_t	openapiPvlanIntfOperAssocGet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_VLAN_LIST_t *operationalVidList)
	Get the list of operational VLAN(s) for a private VLAN interface. More...
open_error_t	openapiPvlanIntfPromiscAssocGet (openapiClientHandle_t *client_handle, uint32_t intf, uint32_t *primaryVid, OPEN_VLAN_LIST_t *secondaryVidList)
	Get the private VLAN association for a promiscuous mode interface. More...
open_error_t	openapiPvlanIntfPromiscTrunkAssocNextGet (openapiClientHandle_t *client_handle, uint32_t intf, uint32_t primaryVid, uint32_t *nextPrimaryVid, OPEN_VLAN_LIST_t *secondaryVidList)
	Get the next primary VLAN and any associated secondary VLAN(s) for a promiscuous trunk interface in a private VLAN. More...
open_error_t	openapiPvlanIntfTrunkAllowedVlanListGet (openapiClientHandle_t *client_handle, uint32_t intf, OPEN_VLAN_LIST_t *normalVidList)
	Get the list of normal VLAN(s) carried by a promiscuous or isolated trunk interface in a private VLAN. More...
open_error_t	openapiPvlanIntfTrunkNativeVlanGet (openapiClientHandle_t *client_handle, uint32_t intf, uint32_t *nativeVid)
	Get the native VLAN for a promiscuous or isolated trunk interface in a private VLAN. More...
open_error_t	openapiQportsCurrentIngressFilteringGet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t *val)
	Get the Current Ingress Filtering configuration for a port. More...
open_error_t	openapiQportsEnableIngressFilteringGet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t *val)
	Get the Ingress Filtering configuration for a port. More...
open_error_t	openapiQportsEnableIngressFilteringSet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t mode)
	Set the Ingress Filtering configuration for a port. More...
open_error_t	openapiStaticVlanEntriesGet (openapiClientHandle_t *client_handle, uint32_t *val)
	Get the number of static VLANs. More...
open_error_t	openapiVlanCreate (openapiClientHandle_t *client_handle, uint32_t vlanNum)
	Creates the VLAN with the ID specified on the switch. More...
open_error_t	openapiVlanCreatedCheck (openapiClientHandle_t *client_handle, uint32_t vlanNum)
	Test if the given VLAN has been configured on the switch. More...
open_error_t	openapiVlanDelete (openapiClientHandle_t *client_handle, uint32_t vlanNum)
	Deletes the VLAN with the ID specified on the switch. More...
open_error_t	openapiVlanGlobalAutoTrunkGet (openapiClientHandle_t *client_handle, OPEN_CONTROL_t *adminMode)
	Get the Auto-Trunk administrative mode. More...
open_error_t	openapiVlanGlobalAutoTrunkSet (openapiClientHandle_t *client_handle, OPEN_CONTROL_t adminMode)
	Set the Auto-Trunk administrative mode. More...
open_error_t	openapiVlanIfAcceptFrameTypeGet (openapiClientHandle_t *client_handle, uint32_t ifNum, OPEN_DOT1Q_ACCEPT_FRAME_TYPE_t *type)
	Get the Acceptable Frame Type configuration for a port. More...
open_error_t	openapiVlanIfAcceptFrameTypeSet (openapiClientHandle_t *client_handle, uint32_t ifNum, OPEN_DOT1Q_ACCEPT_FRAME_TYPE_t type)
	Set the Acceptable Frame Type configuration for a port. More...
open_error_t	openapiVlanIfDefaultUserPriorityGet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t *priority)
	Gets an interface's default user priority. More...
open_error_t	openapiVlanIfDefaultUserPrioritySet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t priority)
	Sets an interface's default user priority. More...
open_error_t	openapiVlanIfNumTrafficClassesGet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t *numTrafficClasses)
	Gets an interface's number of traffic classes supported. More...
open_error_t	openapiVlanIfParticipationGet (openapiClientHandle_t *client_handle, uint32_t vlanNum, uint32_t ifNum, OPEN_VLAN_PARTICIPATION_MODE_t *participationMode)
	Gets an interface's configured participation mode for the specified VLAN. More...
open_error_t	openapiVlanIfParticipationSet (openapiClientHandle_t *client_handle, uint32_t vlanNum, uint32_t ifNum, OPEN_VLAN_PARTICIPATION_MODE_t participationMode)
	Sets an interface's participation mode configuration for the specified VLAN. More...
open_error_t	openapiVlanIfParticipationStatusGet (openapiClientHandle_t *client_handle, uint32_t vlanNum, uint32_t ifNum, uint32_t *participating)
	Gets an interface's participation status for the specified VLAN. More...
open_error_t	openapiVlanIfPvidGet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t *vlanNum)
	Gets an interface's PVID. More...
open_error_t	openapiVlanIfPvidSet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t vlanNum)
	Sets an interface's VLAN ID (PVID). More...
open_error_t	openapiVlanIfTaggingGet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t vlanNum, OPEN_CONTROL_t *tagging)
	Gets an interface's tagging setting for the specified VLAN. More...
open_error_t	openapiVlanIfTaggingSet (openapiClientHandle_t *client_handle, uint32_t ifNum, uint32_t vlanNum, OPEN_CONTROL_t tagging)
	Sets an interface's tagging mode for the given VLAN. More...
int	openapiVlanIsStatic (openapiClientHandle_t *client_handle, uint32_t vlanNum)
	Returns whether the VLAN is static. More...
open_error_t	openapiVlanMacAdd (openapiClientHandle_t *client_handle, open_buffdesc *mac, uint32_t vlanId)
	To add a mac to a VLAN. More...
open_error_t	openapiVlanMacDelete (openapiClientHandle_t *client_handle, open_buffdesc *mac, uint32_t vlanId)
	To delete a mac from a VLAN. More...
open_error_t	openapiVlanMacGet (openapiClientHandle_t *client_handle, open_buffdesc *mac, uint32_t *vlanId)
	To get the details of the mac vlan entry. More...
open_error_t	openapiVlanMacGetNext (openapiClientHandle_t *client_handle, open_buffdesc *mac, open_buffdesc *nextmac, uint32_t *nextvlanId)
	Gets the next MAC vlan entry details of a given MAC. More...
open_error_t	openapiVlanNameGet (openapiClientHandle_t *client_handle, uint32_t vlanNum, open_buffdesc *vlanName)
	Gets the VLAN Name. More...
open_error_t	openapiVlanNameLenGet (openapiClientHandle_t *client_handle, uint32_t *strLen)
	Gets the VLAN Name string length. More...
open_error_t	openapiVlanNameSet (openapiClientHandle_t *client_handle, uint32_t vlanNum, open_buffdesc *vlanName)
	Configures a VLAN Name. More...
open_error_t	openapiVlanNextChangedGet (openapiClientHandle_t *client_handle, uint32_t vlanNum, uint32_t *nextVlanNum, uint32_t *delete_pending)
	Gets the next VLAN which has a pending change or a pending deletion. More...
open_error_t	openapiVlanNextGet (openapiClientHandle_t *client_handle, uint32_t vlanNum, uint32_t *nextVlanNum)
	Gets the next VLAN number that has been configured on the switch. More...
open_error_t	openapiVlanTaggedSetGet (openapiClientHandle_t *client_handle, uint32_t vlanId, uint32_t ifNum, uint32_t *val)
	Get the tagging configuration of a port. More...
open_error_t	openapiVlanTypeGet (openapiClientHandle_t *client_handle, uint32_t vlanNum, OPEN_DOT1Q_VLAN_TYPE_t *vlanType)
	Gets the VLAN type for the specified VLAN. More...
open_error_t	openapiVlanVIDListGet (openapiClientHandle_t *client_handle, uint32_t intfNum, OPEN_VLAN_LIST_t *data, uint32_t *numOfElements)
	Get a list of VLANs an interface is a member of. More...

Detailed Description

Enumeration Type Documentation

enum OPEN_DOT1Q_PVLAN_PORT_TYPE_t

Enumerator
OPEN_PRIVATE_VLAN_UNCONFIGURED_PORT	Unconfigured port.
OPEN_PRIVATE_VLAN_HOST_PORT	Host port.
OPEN_PRIVATE_VLAN_COMMUNITY_PORT	Community port.
OPEN_PRIVATE_VLAN_PROMISCOUS_PORT	Promiscous port.

Definition at line 81 of file openapi_vlan.h.

enum OPEN_DOT1Q_PVLAN_TYPE_t

Enumerator
OPEN_PRIVATE_VLAN_UNCONFIGURED	Unconfigured.
OPEN_PRIVATE_VLAN_PRIMARY	Primary.
OPEN_PRIVATE_VLAN_SECONDARY_ISOLATED	Secondary isolated.
OPEN_PRIVATE_VLAN_SECONDARY_COMMUNITY	Secondary community.

Definition at line 71 of file openapi_vlan.h.

enum OPEN_DOT1Q_SWPORT_MODE_t

< Dot1q port modes.

Enumerator
OPEN_DOT1Q_SWPORT_MODE_NONE	This is used by applications like gvrp who do not care about the mode.
OPEN_DOT1Q_SWPORT_MODE_GENERAL	Switchport general mode.
OPEN_DOT1Q_SWPORT_MODE_ACCESS	Switchport access mode.
OPEN_DOT1Q_SWPORT_MODE_TRUNK	Switchport trunk mode.
OPEN_DOT1Q_SWPORT_MODE_PRIVATE_HOST	Switchport private host mode.
OPEN_DOT1Q_SWPORT_MODE_PRIVATE_PROMISC	Switchport private promisc mode.
OPEN_DOT1Q_SWPORT_MODE_PRIVATE_PROMISC_TRUNK	Switchport private promisc trunk mode.
OPEN_DOT1Q_SWPORT_MODE_PRIVATE_ISOLATED_TRUNK	Switchport private isolated trunk mode.
OPEN_DOT1Q_SWPORT_MODE_AUTO_TRUNK	Switchport auto trunk mode.

Definition at line 48 of file openapi_vlan.h.

enum OPEN_DOT1Q_VLAN_TYPE_t

Enumerator
OPEN_DOT1Q_VLAN_TYPE_NOT_PARTICIPATING	Not Participating.
OPEN_DOT1Q_VLAN_TYPE_DEFAULT	Default VLAN, always valued at 1.
OPEN_DOT1Q_VLAN_TYPE_ADMIN	Administratively configured, static VLAN.
OPEN_DOT1Q_VLAN_TYPE_GVRP_REGISTERED	Dynamically configured GVRP VLAN.
OPEN_DOT1Q_VLAN_TYPE_WS_L2_TNNL_REGISTERED	Dynamically configured L2 Tunnel VLAN.
OPEN_DOT1Q_VLAN_TYPE_IP_INTERNAL_VLAN	Dynamically configured IP internal VLAN.
OPEN_DOT1Q_VLAN_TYPE_AUTHMGR_REGISTERED	Dynamically configured Auth manager/DOT1X VLAN.
OPEN_DOT1Q_VLAN_TYPE_MVRP_REGISTERED	Dynamically configured MVRP VLAN.
OPEN_DOT1Q_VLAN_TYPE_OPENFLOW_REGISTERED	Dynamically configured OPENFLOW VLAN.
OPEN_DOT1Q_VLAN_TYPE_AUTO_VIDEO_REGISTERED	Auto-Video VLAN.
OPEN_DOT1Q_VLAN_TYPE_EVC_REGISTERED	EVC VLAN.
OPEN_DOT1Q_VLAN_TYPE_PBB_REGISTERED	PBB VLAN.

Definition at line 90 of file openapi_vlan.h.

Function Documentation

open_error_t openapiDot1qApiPrivateVlanAssocAdd	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanId,
		OPEN_VLAN_LIST_t	vidList
	)

Setup a VLAN bindings for private VLAN domain.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanId	VLAN ID
[in]	vidList	Secondary VLAN list

Return values

OPEN_E_NONE	Set successful.
OPEN_E_FAIL	Set failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.

OpEN API Version: 1.19

Examples:

vlan_example.c.

open_error_t openapiDot1qApiPrivateVlanAssocRemove	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanId,
		OPEN_VLAN_LIST_t	vidList
	)

Remove VLAN bindings for private VLAN domain.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanId	VLAN ID
[in]	vidList	Secondary VLAN list

Return values

OPEN_E_NONE	Set successful.
OPEN_E_FAIL	Set failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.

OpEN API Version: 1.19

Examples:

vlan_example.c.

open_error_t openapiDot1qIntfPVlanHostAssocSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t	primary_vlan,
		uint32_t	sec_vlan
	)

Set VLAN bindings for private VLAN interface.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	internal interface number
[in]	primary_vlan	primary VLAN ID
[in]	sec_vlan	Secondary VLAN ID

Return values

OPEN_E_NONE	Set successful.
OPEN_E_FAIL	Set failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.

OpEN API Version: 1.19

Examples:

vlan_example.c.

open_error_t openapiDot1qIntfPVlanPromiscAssocSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t	primary_vlan,
		OPEN_VLAN_LIST_t	vidList
	)

Set VLAN bindings for private VLAN interface.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	internal interface number
[in]	primary_vlan	primary VLAN ID
[in]	vidList	Secondary VLAN ID List

Return values

OPEN_E_NONE	Set successful.
OPEN_E_FAIL	Set failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.

OpEN API Version: 1.19

Examples:

vlan_example.c.

open_error_t openapiDot1qMaxSupportedVlansGet	(	openapiClientHandle_t *	client_handle,
		uint32_t *	val
	)

Get dot1q Max Supported VLANs.

Parameters

[in]	client_handle	client handle from registration API
[out]	val	max supported VLAN count

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiDot1qOperAutoTrunkModeGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intIfNum,
		OPEN_BOOL_t *	autoTrunkOperMode
	)

Get the operational auto-trunk mode of the interface.

Parameters

[in]	client_handle	client handle from registration API.
[in]	intIfNum	internal interface number.
[out]	autoTrunkOperMode	operational auto-trunk mode.

Return values

OPEN_E_NONE	Operational auto-trunk get successfully.
OPEN_E_FAIL	Failed to get operational auto-trunk mode.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_UNAVAIL	Auto-Trunk Feature not present.
OPEN_E_INTERNAL	Internal application failure.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiDot1qPortIngressFiltering	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t *	val
	)

Get VLAN ingress filtering status per port.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	internal interface number of physical or logical interface
[out]	val	ingress filter mode - enable (1) or disable (0)

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiDot1qPrivateVlanAssociationGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanId,
		OPEN_VLAN_LIST_t *	vidList
	)

Get VLAN bindings for private VLAN domain.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanId	VLAN ID
[out]	vidList	Secondary VLAN list

Return values

OPEN_E_NONE	Get successful.
OPEN_E_FAIL	Get failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.

OpEN API Version: 1.19

Examples:

vlan_example.c.

open_error_t openapiDot1qPrivateVlanEnable	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanId,
		OPEN_DOT1Q_PVLAN_TYPE_t	pvlanType
	)

Setup a VLAN as private VLAN.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanId	VLAN ID
[in]	pvlanType	private VLAN type

Return values

OPEN_E_NONE	Set successful.
OPEN_E_FAIL	Set failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.

OpEN API Version: 1.19

Examples:

vlan_example.c.

open_error_t openapiDot1qPrivateVlanGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanId,
		OPEN_DOT1Q_PVLAN_TYPE_t *	pvlanType
	)

Get the configured private VLAN type.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanId	VLAN ID
[out]	pvlanType	private VLAN type

Return values

OPEN_E_NONE	Get successful.
OPEN_E_FAIL	Get failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.

OpEN API Version: 1.19

Examples:

vlan_example.c.

open_error_t openapiDot1qPVlanIntfHostAssocRemove	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum
	)

Clear VLAN bindings for private VLAN interface.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	internal interface number

Return values

OPEN_E_NONE	Set successful.
OPEN_E_FAIL	Set failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.

OpEN API Version: 1.19

Examples:

vlan_example.c.

open_error_t openapiDot1qPVlanIntfPromiscAssocRemove	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum
	)

Clear VLAN bindings for private VLAN interface.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	internal interface number

Return values

OPEN_E_NONE	Set successful.
OPEN_E_FAIL	Set failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.

OpEN API Version: 1.19

Examples:

vlan_example.c.

open_error_t openapiDot1qRxPacketsNotForwardedCountGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint64_t *	totalRxPktsNotForwarded
	)

Get the total number of received packets that are not forwarded of the interafce.

Parameters

[in]	client_handle	Client handle from registration API.
[in]	ifNum	Internal interface number
[out]	totalRxPktsNotForwarded	Total number of received packets that are not forwarded.

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.
OPEN_E_NOT_FOUND	If this Counter is not supported.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiDot1qSwPortAccessVlanGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		uint32_t *	vlanId
	)

Get the Access VLAN ID for a port.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[out]	vlanId	Storage for VLAN ID

Return values

OPEN_E_NONE	if Access VLAN get is successful.
OPEN_E_FAIL	if Access VLAN get failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

Examples:

switchport_config_example.c.

open_error_t openapiDot1qSwPortAccessVlanSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		uint32_t	vlanId
	)

Set the Access VLAN ID for a port.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[in]	vlanId	VLAN ID to be set

Return values

OPEN_E_NONE	if Access VLAN set is successful.
OPEN_E_FAIL	if Access VLAN set failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

Examples:

switchport_config_example.c.

open_error_t openapiDot1qSwPortDynamicallyAddedVlanListGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_VLAN_LIST_t *	vidList
	)

Get the dynamically added VLAN list for the interface when the interface is in general mode.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[out]	vidList	VLAN ID List

Return values

OPEN_E_NONE	if Dynamically Added VLAN list get is successful.
OPEN_E_FAIL	if Dynamically Added VLAN list get failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

open_error_t openapiDot1qSwPortForbiddenVlanListGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_VLAN_LIST_t *	vidList
	)

Get the forbidden VLAN list for the interface when the interface is in general mode.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[out]	vidList	VLAN ID List

Return values

OPEN_E_NONE	if Forbidden VLAN list get is successful.
OPEN_E_FAIL	if Forbidden VLAN list get failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

open_error_t openapiDot1qSwPortModeGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_DOT1Q_SWPORT_MODE_t *	mode
	)

Get the Switchport Configuration Mode for a port.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[out]	mode	Switchport Mode

Return values

OPEN_E_NONE	if Switchport Mode get is successful.
OPEN_E_FAIL	if Switchport Mode get failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

Examples:

switchport_config_example.c.

open_error_t openapiDot1qSwPortModeSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_DOT1Q_SWPORT_MODE_t	mode
	)

Set the Switchport Configuration Mode for a port.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[in]	mode	New Switchport Mode to be set

Return values

OPEN_E_NONE	if Switchport Mode set is successful.
OPEN_E_FAIL	if Switchport Mode set failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

Examples:

switchport_config_example.c.

open_error_t openapiDot1qSwPortTaggedVlanListGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_VLAN_LIST_t *	vidList
	)

Get the tagged VLAN list for the interface when the interface is in general mode.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[out]	vidList	VLAN ID List

Return values

OPEN_E_NONE	if Tagged VLAN list get is successful.
OPEN_E_FAIL	if Tagged VLAN list get failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

open_error_t openapiDot1qSwPortTrunkAllowedVlanListGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_VLAN_LIST_t *	vidList
	)

Get the list of VLANs allowed on an interface when the interface is in trunking mode.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[out]	vidList	VLAN ID List

Return values

OPEN_E_NONE	if Allowed VLAN list get is successful.
OPEN_E_FAIL	if Allowed VLAN list get failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

Examples:

switchport_config_example.c.

open_error_t openapiDot1qSwPortTrunkAllowedVlanListSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_VLAN_LIST_t *	vidList
	)

Set the list of VLANs allowed on an interface when the interface is in trunking mode.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[in]	vidList	VLAN ID List

Return values

OPEN_E_NONE	if Allowed VLAN list set is successful.
OPEN_E_FAIL	if Allowed VLAN list set failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

Examples:

switchport_config_example.c.

open_error_t openapiDot1qSwPortTrunkNativeVlanGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		uint32_t *	vlanId
	)

Get the Native VLAN ID for a port when in trunking mode.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[out]	vlanId	Storage space for the VLAN ID

Return values

OPEN_E_NONE	if Native VLAN get is successful.
OPEN_E_FAIL	if Native VLAN get failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

Examples:

switchport_config_example.c.

open_error_t openapiDot1qSwPortTrunkNativeVlanSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		uint32_t	vlanId
	)

Set the native VLAN ID for a port when in trunking mode.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[in]	vlanId	VLAN ID to be set

Return values

OPEN_E_NONE	if native VLAN set is successful.
OPEN_E_FAIL	if native VLAN set failed.
OPEN_E_PARAM	invalid parameter(s)
OPEN_E_DISABLED	when specified VLAN is not in allowed VLAN list

OpEN API Version: 1.11

Examples:

switchport_config_example.c.

open_error_t openapiDot1qSwPortUntaggedVlanListGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_VLAN_LIST_t *	vidList
	)

Get the untagged VLAN list for the interface when the interface is in general mode.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[out]	vidList	VLAN ID List

Return values

OPEN_E_NONE	if Untagged VLAN list get is successful.
OPEN_E_FAIL	if Untagged VLAN list get failed.
OPEN_E_PARAM	invalid parameter(s)

OpEN API Version: 1.11

open_error_t openapiDot1qVlanNumDeletesGet	(	openapiClientHandle_t *	client_handle,
		uint32_t *	val
	)

Get the number of times a VLAN entry has been deleted from DOT1Q table.

Parameters

[in]	client_handle	client handle from registration API
[out]	val	number of times VLANs are deleted

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiDynamicVlanEntriesGet	(	openapiClientHandle_t *	client_handle,
		uint32_t *	val
	)

Get the number of dynamic VLANs.

Parameters

[in]	client_handle	client handle from registration API
[out]	val	number of dynamic VLANs

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiMostVlanEntriesGet	(	openapiClientHandle_t *	client_handle,
		uint32_t *	val
	)

Get the max VLAN entries allowed.

Parameters

[in]	client_handle	client handle from registration API
[out]	val	number of VLANs in use on device

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiNextVlanGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vid,
		uint32_t *	nextVid
	)

Gets the next VLAN ID.

Parameters

[in]	client_handle	client handle from registration API
[in]	vid	current VLAN Id
[out]	nextVid	next VLAN id

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiPvlanIntfHostAssocGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		uint32_t *	primaryVid,
		uint32_t *	secondaryVid
	)

Get the private VLAN association for a host mode interface.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[out]	primaryVid	Primary VLAN ID of the Private VLAN
[out]	secondaryVid	Secondary VLAN ID of the Private VLAN

Return values

OPEN_E_NONE	Host mode PVLAN bindings get successful.
OPEN_E_FAIL	Host mode PVLAN bindings get failed.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.18

Note

An output value of 0 for the primaryVid and/or secondaryVid means there is no host VLAN association configured for this interface.

Examples:

pvlan_example.c, and vlan_example.c.

open_error_t openapiPvlanIntfIsolatedTrunkAssocNextGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		uint32_t	primaryVid,
		uint32_t *	nextPrimaryVid,
		uint32_t *	secondaryVid
	)

Get the next primary VLAN and any associated secondary VLAN for an isolated trunk interface in a private VLAN.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[in]	primaryVid	Primary VLAN ID to begin search
[out]	nextPrimaryVid	Next Primary VLAN ID associated with this trunk
[out]	secondaryVid	Secondary VLAN ID that is mapped to the next primary VLAN ID

Return values

OPEN_E_NONE	Isolated trunk association next get successful.
OPEN_E_FAIL	Isolated trunk association next get failed.
OPEN_E_NOT_FOUND	No more instances available.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.18

Note

This API is meaningful only for an interface configured as an isolated trunk, as indicated by openapiPvlanIntfModeGet().

Use 0 for the primaryVid to obtain the first associated primary VLAN.

Examples:

pvlan_example.c.

open_error_t openapiPvlanIntfModeGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_DOT1Q_SWPORT_MODE_t *	mode
	)

Get the private VLAN mode for an interface.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[out]	mode	Private VLAN Mode

Return values

OPEN_E_NONE	PVLAN mode get successful.
OPEN_E_FAIL	PVLAN mode get failed.
OPEN_E_NOT_FOUND	Interface not configured as a PVLAN.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.18

Note

This is similar to openapiDot1qSwPortModeGet(), but is focused exclusively on the private VLAN mode configuration of an interface.

Examples:

pvlan_example.c.

open_error_t openapiPvlanIntfOperAssocGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_VLAN_LIST_t *	operationalVidList
	)

Get the list of operational VLAN(s) for a private VLAN interface.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[out]	operationalVidList	Operational VLAN ID List carried by PVLAN trunk

Return values

OPEN_E_NONE	Operational VLAN list get successful.
OPEN_E_FAIL	Operational VLAN list get failed.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.18

Note

The VLANs that are in operation for an interface depend on its currently configured private VLAN mode and type.

Examples:

pvlan_example.c.

open_error_t openapiPvlanIntfPromiscAssocGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		uint32_t *	primaryVid,
		OPEN_VLAN_LIST_t *	secondaryVidList
	)

Get the private VLAN association for a promiscuous mode interface.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[out]	primaryVid	Primary VLAN ID of the Private VLAN
[out]	secondaryVidList	Secondary VLAN ID List that is mapped to primary VLAN ID

Return values

OPEN_E_NONE	Promiscuous mode PVLAN bindings get successful.
OPEN_E_FAIL	Promiscuous mode PVLAN bindings get failed.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.18

Note

An output value of 0 for the primaryVid and/or no entries in the secondaryVidList means there is no promiscuous VLAN association for this interface.

Examples:

pvlan_example.c, and vlan_example.c.

open_error_t openapiPvlanIntfPromiscTrunkAssocNextGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		uint32_t	primaryVid,
		uint32_t *	nextPrimaryVid,
		OPEN_VLAN_LIST_t *	secondaryVidList
	)

Get the next primary VLAN and any associated secondary VLAN(s) for a promiscuous trunk interface in a private VLAN.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[in]	primaryVid	Primary VLAN ID to begin search
[out]	nextPrimaryVid	Next Primary VLAN ID associated with this trunk
[out]	secondaryVidList	Secondary VLAN ID List that is mapped to next primary VLAN ID

Return values

OPEN_E_NONE	Promiscuous trunk association next get successful.
OPEN_E_FAIL	Promiscuous trunk association next get failed.
OPEN_E_NOT_FOUND	No more instances available.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.18

Note

This API is meaningful only for an interface configured as a promiscuous trunk, as indicated by openapiPvlanIntfModeGet().

Use 0 for the primaryVid to obtain the first associated primary VLAN.

Examples:

pvlan_example.c.

open_error_t openapiPvlanIntfTrunkAllowedVlanListGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		OPEN_VLAN_LIST_t *	normalVidList
	)

Get the list of normal VLAN(s) carried by a promiscuous or isolated trunk interface in a private VLAN.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[out]	normalVidList	Normal VLAN ID List carried by PVLAN trunk

Return values

OPEN_E_NONE	PVLAN trunk normal VLAN list get successful.
OPEN_E_FAIL	PVLAN trunk normal VLAN list get failed.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.18

Note

This API is meaningful only for an interface configured as a promiscuous or isolated trunk, as indicated by openapiPvlanIntfModeGet().

Examples:

pvlan_example.c.

open_error_t openapiPvlanIntfTrunkNativeVlanGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intf,
		uint32_t *	nativeVid
	)

Get the native VLAN for a promiscuous or isolated trunk interface in a private VLAN.

Parameters

[in]	client_handle	Client handle from registration API
[in]	intf	Interface Number
[out]	nativeVid	Native VLAN ID

Return values

OPEN_E_NONE	PVLAN trunk native VLAN get successful.
OPEN_E_FAIL	PVLAN trunk native VLAN get failed.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.18

Note

This API is meaningful only for an interface configured as a promiscuous or isolated trunk, as indicated by openapiPvlanIntfModeGet().

The trunk native VLAN is the one assigned to untagged packets received on the specified trunk interface in a private VLAN. An output value of 0 means the native VLAN is not currently configured for this trunk interface.

Examples:

pvlan_example.c.

open_error_t openapiQportsCurrentIngressFilteringGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t *	val
	)

Get the Current Ingress Filtering configuration for a port.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	internal interface number of physical or logical interface
[out]	val	ingress filter mode - enable (1) or disable (0)

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiQportsEnableIngressFilteringGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t *	val
	)

Get the Ingress Filtering configuration for a port.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	internal interface number of physical or logical interface
[out]	val	enable (1) or disable (0)

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiQportsEnableIngressFilteringSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t	mode
	)

Set the Ingress Filtering configuration for a port.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	internal interface number of physical or logical interface or all interfaces
[in]	mode	enable (1) or disable (0)

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiStaticVlanEntriesGet	(	openapiClientHandle_t *	client_handle,
		uint32_t *	val
	)

Get the number of static VLANs.

Parameters

[in]	client_handle	client handle from registration API
[out]	val	number of static VLANs

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiVlanCreate	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum
	)

Creates the VLAN with the ID specified on the switch.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	VLAN ID.

Return values

OPEN_E_NONE	The VLAN was successfully created.
OPEN_E_FAIL	The VLAN was not successfully created.
OPEN_E_PARAM	Error in parameter passed.

Note

Calling this API will change the running configuration of the switch.

OpEN API Version: 1.1

Examples:

dot1ad_example.c, pbvlan_example.c, and vlan_example.c.

open_error_t openapiVlanCreatedCheck	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum
	)

Test if the given VLAN has been configured on the switch.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	VLAN ID.

Return values

OPEN_E_NONE	The VLAN is configured.
OPEN_E_FAIL	The VLAN is not configured.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.1

Examples:

vlan_example.c, vlan_example.rb, and vlan_status_example.c.

open_error_t openapiVlanDelete	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum
	)

Deletes the VLAN with the ID specified on the switch.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	VLAN ID.

Return values

OPEN_E_NONE	The VLAN was successfully deleted.
OPEN_E_FAIL	The VLAN was not successfully deleted.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_UNAVAIL	The default VLAN deletion is not allowed.
OPEN_E_INTERNAL	Other Internal Failure.

Note

Calling this API will change the running configuration of the switch.

OpEN API Version: 1.1

Examples:

pbvlan_example.c, and vlan_example.c.

open_error_t openapiVlanGlobalAutoTrunkGet	(	openapiClientHandle_t *	client_handle,
		OPEN_CONTROL_t *	adminMode
	)

Get the Auto-Trunk administrative mode.

Parameters

[in]	client_handle	client handle from registration API.
[out]	adminMode	auto-trunk administrative mode value.

Return values

OPEN_E_NONE	Auto-Trunk global admin mode get successfully.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_UNAVAIL	Auto-Trunk Feature not present.
OPEN_E_INTERNAL	Internal application failure.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiVlanGlobalAutoTrunkSet	(	openapiClientHandle_t *	client_handle,
		OPEN_CONTROL_t	adminMode
	)

Set the Auto-Trunk administrative mode.

Parameters

[in]	client_handle	client handle from registration API.
[in]	adminMode	auto-trunk administrative mode value.

Return values

OPEN_E_NONE	Auto-Trunk global admin mode set successfully.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_UNAVAIL	Auto-Trunk Feature not present.
OPEN_E_INTERNAL	Internal application failure.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiVlanIfAcceptFrameTypeGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		OPEN_DOT1Q_ACCEPT_FRAME_TYPE_t *	type
	)

Get the Acceptable Frame Type configuration for a port.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	physical or logical interface to be configured
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[out]	type	Frame type

Return values

OPEN_E_NONE	Frame type was successfully retrieved.
OPEN_E_FAIL	Frame type was not successfully retrieved.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.1

Examples:

vlan_example.c.

open_error_t openapiVlanIfAcceptFrameTypeSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		OPEN_DOT1Q_ACCEPT_FRAME_TYPE_t	type
	)

Set the Acceptable Frame Type configuration for a port.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	physical or logical interface to be configured
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[in]	type	Frame Type

Return values

OPEN_E_NONE	Success
OPEN_E_FAIL	Frame type not set
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.1

Examples:

vlan_example.c.

open_error_t openapiVlanIfDefaultUserPriorityGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t *	priority
	)

Gets an interface's default user priority.

This is the priority assigned to packets received untagged.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	Interface ID
[out]	priority	Priority assigned to packets.

Return values

OPEN_E_NONE	Port default priority was successfully retrieved.
OPEN_E_FAIL	Port default priority was not successfully retrieved.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.14

Examples:

vlan_example.c.

open_error_t openapiVlanIfDefaultUserPrioritySet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t	priority
	)

Sets an interface's default user priority.

This is the priority assigned to packets received untagged.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	Interface ID
[in]	priority	Priority assigned to packets. Acceptable
	-	Minimum value 0
	-	Maximum value openapiVlanIfNumTrafficClassesGet() - 1

Return values

OPEN_E_NONE	Port default priority was successfully set.
OPEN_E_FAIL	Port default priority was not successfully set.
OPEN_E_PARAM	Error in parameter passed.

Note

Calling this API will change the running configuration of the switch.

OpEN API Version: 1.14

Examples:

vlan_example.c.

open_error_t openapiVlanIfNumTrafficClassesGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t *	numTrafficClasses
	)

Gets an interface's number of traffic classes supported.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	Interface ID
[out]	numTrafficClasses	number of traffic classes

Return values

OPEN_E_NONE	Number of traffic classes was successfully retrieved.
OPEN_E_FAIL	Number of traffic classes was not successfully retrieved.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.14

Examples:

vlan_example.c.

open_error_t openapiVlanIfParticipationGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum,
		uint32_t	ifNum,
		OPEN_VLAN_PARTICIPATION_MODE_t *	participationMode
	)

Gets an interface's configured participation mode for the specified VLAN.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	VLAN ID
[in]	ifNum	Interface ID
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[out]	participationMode	Mode of participation

Return values

OPEN_E_NONE	Participation mode was successfully deleted.
OPEN_E_FAIL	Participation mode was not successfully deleted.
OPEN_E_NOT_FOUND	The VLAN specified is not created.
OPEN_E_PARAM	Error in parameter passed.

Note

Calling this API will change the running configuration of the switch.

OpEN API Version: 1.1

Examples:

vlan_example.c.

open_error_t openapiVlanIfParticipationSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum,
		uint32_t	ifNum,
		OPEN_VLAN_PARTICIPATION_MODE_t	participationMode
	)

Sets an interface's participation mode configuration for the specified VLAN.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	VLAN ID
[in]	ifNum	Interface ID
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[in]	participationMode	Mode of participation

Return values

OPEN_E_NONE	Participation mode was successfully set.
OPEN_E_FAIL	Participation mode was not successfully set.
OPEN_E_UNAVAIL	Setting participation mode not valid for the specified interface.
OPEN_E_NOT_FOUND	The VLAN specified is not created.
OPEN_E_PARAM	Error in parameter passed.

Note

Calling this API will change the running configuration of the switch.

OpEN API Version: 1.1

Examples:

vlan_example.c.

open_error_t openapiVlanIfParticipationStatusGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum,
		uint32_t	ifNum,
		uint32_t *	participating
	)

Gets an interface's participation status for the specified VLAN.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	VLAN ID
[in]	ifNum	Interface ID
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[out]	participating	1 if participating, 0 if not

Return values

OPEN_E_NONE	Participation status was successfully retrieved.
OPEN_E_FAIL	Participation status was not successfully retrieved.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.1

Examples:

vlan_example.c.

open_error_t openapiVlanIfPvidGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t *	vlanNum
	)

Gets an interface's PVID.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	Interface ID
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[out]	vlanNum	VLAN ID

Return values

OPEN_E_NONE	PVID was successfully retrieved.
OPEN_E_FAIL	PVID was not successfully retrieved.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.1

Examples:

vlan_example.c.

open_error_t openapiVlanIfPvidSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t	vlanNum
	)

Sets an interface's VLAN ID (PVID).

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	Interface ID
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[in]	vlanNum	VLAN ID

Return values

OPEN_E_NONE	PVID was successfully set.
OPEN_E_FAIL	PVID was not successfully set.
OPEN_E_UNAVAIL	Setting PVID not valid for the specified interface.
OPEN_E_NOT_FOUND	The VLAN specified is not created.

Note

Calling this API will change the running configuration of the switch.

OpEN API Version: 1.1

Examples:

vlan_example.c.

open_error_t openapiVlanIfTaggingGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t	vlanNum,
		OPEN_CONTROL_t *	tagging
	)

Gets an interface's tagging setting for the specified VLAN.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	Interface ID
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[in]	vlanNum	VLAN ID
[out]	tagging	OPEN_ENABLE if port is sending tagged packets on the VLAN

Return values

OPEN_E_NONE	PVID was successfully retrieved.
OPEN_E_FAIL	PVID was not successfully retrieved.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.1

Examples:

vlan_example.c.

open_error_t openapiVlanIfTaggingSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	ifNum,
		uint32_t	vlanNum,
		OPEN_CONTROL_t	tagging
	)

Sets an interface's tagging mode for the given VLAN.

Parameters

[in]	client_handle	client handle from registration API
[in]	ifNum	Interface ID
	-	Minimum value 1
	-	Maximum value openapiMaxInterfaceCountGet()
[in]	vlanNum	VLAN ID
[in]	tagging	VLAN tagging

Return values

OPEN_E_NONE	Tagging mode was successfully set.
OPEN_E_FAIL	Tagging mode was not successfully set.
OPEN_E_UNAVAIL	Setting tagging mode not valid for the specified interface.
OPEN_E_NOT_FOUND	The VLAN specified is not created.

Note

Calling this API will change the running configuration of the switch.

OpEN API Version: 1.1

Examples:

vlan_example.c.

int openapiVlanIsStatic	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum
	)

Returns whether the VLAN is static.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	VLAN ID.

Returns

0 The VLAN is dynamic. 1 The VLAN is static.

OpEN API Version: 1.1

Examples:

vlan_example.rb, and vlan_status_example.c.

open_error_t openapiVlanMacAdd	(	openapiClientHandle_t *	client_handle,
		open_buffdesc *	mac,
		uint32_t	vlanId
	)

To add a mac to a VLAN.

Parameters

[in]	client_handle	Client handle from registration API
[in]	mac	Mac address
[in]	vlanId	Vlan id

Return values

OPEN_E_NONE	Addition of MAC to VLAN is successful.
OPEN_E_FAIL	Addition of MAC to VLAN is failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.
OPEN_E_UNAVAIL	Feature not available.

Note

Calling this API will change the running configuration of the switch

MAC address string should be in one of the below formats: "xx:xx:xx:xx:xx:xx", "xx-xx-xx-xx-xx-xx", "xxxx.xxxx.xxxx"

OpEN API Version: 1.25

Examples:

vlan_mac_example.c.

open_error_t openapiVlanMacDelete	(	openapiClientHandle_t *	client_handle,
		open_buffdesc *	mac,
		uint32_t	vlanId
	)

To delete a mac from a VLAN.

Parameters

[in]	client_handle	Client handle from registration API
[in]	mac	Mac address
[in]	vlanId	Vlan id

Return values

OPEN_E_NONE	Deletion of MAC to VLAN is successful.
OPEN_E_FAIL	Deletion of MAC to VLAN is failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.
OPEN_E_UNAVAIL	Feature not available.

Note

Calling this API will change the running configuration of the switch

MAC address string should be in one of the below formats: "xx:xx:xx:xx:xx:xx", "xx-xx-xx-xx-xx-xx", "xxxx.xxxx.xxxx"

OpEN API Version: 1.25

Examples:

vlan_mac_example.c.

open_error_t openapiVlanMacGet	(	openapiClientHandle_t *	client_handle,
		open_buffdesc *	mac,
		uint32_t *	vlanId
	)

To get the details of the mac vlan entry.

Parameters

[in]	client_handle	Client handle from registration API
[in]	mac	Mac address
[out]	vlanId	vlan id

Return values

OPEN_E_NONE	Get successful.
OPEN_E_FAIL	Get failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.
OPEN_E_UNAVAIL	Feature not available.

Note

MAC address string should be in one of the below formats: "xx:xx:xx:xx:xx:xx", "xx-xx-xx-xx-xx-xx", "xxxx.xxxx.xxxx"

OpEN API Version: 1.25

Examples:

vlan_mac_example.c.

open_error_t openapiVlanMacGetNext	(	openapiClientHandle_t *	client_handle,
		open_buffdesc *	mac,
		open_buffdesc *	nextmac,
		uint32_t *	nextvlanId
	)

Gets the next MAC vlan entry details of a given MAC.

Parameters

[in]	client_handle	Client handle from registration API
[in]	mac	Mac address
[out]	nextmac	Next created mac
[out]	nextvlanId	Next vlan id

Return values

OPEN_E_NONE	Get next successful.
OPEN_E_FAIL	Get next failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_UNAVAIL	Feature not available.

Note

MAC address string should be in one of the below formats: "xx:xx:xx:xx:xx:xx", "xx-xx-xx-xx-xx-xx", "xxxx.xxxx.xxxx"

nextmac buffer should have 18 bytes memory.

OpEN API Version: 1.25

Examples:

vlan_mac_example.c.

open_error_t openapiVlanNameGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum,
		open_buffdesc *	vlanName
	)

Gets the VLAN Name.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	VLAN ID
[out]	vlanName	VLAN name

Return values

OPEN_E_NONE	Get successful.
OPEN_E_FAIL	Get failed.
OPEN_E_PARAM	Error in parameter passed.

Note

Maximum size for vlanName is determined by calling openapiVlanNameLenGet().

OpEN API Version: 1.1

Examples:

vlan_example.c.

open_error_t openapiVlanNameLenGet	(	openapiClientHandle_t *	client_handle,
		uint32_t *	strLen
	)

Gets the VLAN Name string length.

This length is used to allocate and initialize the open_buffdesc type argument buffers used by various VLAN OpEN APIs.

Parameters

[in]	client_handle	client handle from registration API
[out]	strLen	string length

Return values

OPEN_E_NONE	String length Get successful.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.1

Examples:

lldp_example.c, and vlan_example.c.

open_error_t openapiVlanNameSet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum,
		open_buffdesc *	vlanName
	)

Configures a VLAN Name.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	VLAN ID
[in]	vlanName	VLAN name Populate vlanName:pstart and size with a char buffer containing the VLAN name

Return values

OPEN_E_NONE	Set successful.
OPEN_E_FAIL	Set failed.
OPEN_E_PARAM	Error in parameter passed.
OPEN_E_INTERNAL	Other Internal Failure.

Note

Calling this API will change the running configuration of the switch.

Maximum size for vlanName is determined by calling openapiVlanNameLenGet().

OpEN API Version: 1.1

Examples:

vlan_example.c.

open_error_t openapiVlanNextChangedGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum,
		uint32_t *	nextVlanNum,
		uint32_t *	delete_pending
	)

Gets the next VLAN which has a pending change or a pending deletion.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	ID of the current VLAN ID
[out]	nextVlanNum	Storage for the returned VLAN ID
[out]	delete_pending	Flag Indicating that the VLAN is pending for deletion.

Return values

OPEN_E_NONE	The next VLAN of the specified type returned.
OPEN_E_FAIL	No next VLAN of the specified type was found.
OPEN_E_PARAM	Error in parameter passed.

OpEN API Version: 1.1

Examples:

vlan_example.rb, and vlan_status_example.c.

open_error_t openapiVlanNextGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum,
		uint32_t *	nextVlanNum
	)

Gets the next VLAN number that has been configured on the switch.

Call with vlanNum set to 0 to get the first VLAN.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanNum	Current VLAN ID.
[out]	nextVlanNum	Next VLAN ID, if one exists.

Return values

OPEN_E_NONE	The next VLAN ID returned.
OPEN_E_FAIL	No next VLAN ID was found.
OPEN_E_PARAM	Error in parameter passed.

Note

Passing a zero vlanNum indicates a request to return the first available VLAN.

OpEN API Version: 1.1

Examples:

vlan_example.c, vlan_example.rb, and vlan_status_example.c.

open_error_t openapiVlanTaggedSetGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanId,
		uint32_t	ifNum,
		uint32_t *	val
	)

Get the tagging configuration of a port.

Parameters

[in]	client_handle	client handle from registration API
[in]	vlanId	VLAN Id
[in]	ifNum	internal interface number of physical or logical interface
[out]	val	tagged status of a port - tagged or untagged

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiVlanTypeGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	vlanNum,
		OPEN_DOT1Q_VLAN_TYPE_t *	vlanType
	)

Gets the VLAN type for the specified VLAN.

Parameters

[in]	client_handle	Client handle from registration API.
[in]	vlanNum	VLAN ID.
[out]	vlanType	VLAN type.

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.
OPEN_E_NOT_FOUND	The VLAN specified is not created.

OpEN API Version: 1.26

Examples:

vlan_example.c.

open_error_t openapiVlanVIDListGet	(	openapiClientHandle_t *	client_handle,
		uint32_t	intfNum,
		OPEN_VLAN_LIST_t *	data,
		uint32_t *	numOfElements
	)

Get a list of VLANs an interface is a member of.

Parameters

[in]	client_handle	client handle from registration API
[in]	intfNum	internal interface number of physical or logical interface
[out]	data	pointer to data
[out]	numOfElements	length of the VLAN list

Return values

OPEN_E_NONE	On success.
OPEN_E_FAIL	On failure.
OPEN_E_PARAM	Invalid argument.

OpEN API Version: 1.26

Examples:

vlan_example.c.