IBM System Storage DS3000 storage subsystem controller firmware 
version 07.35.41.02 

This firmware version is required to support the IBM DS3000 System 
Storage DS3200, DS3300 and DS3400 storage subsystems. The IBM DS3000 
Storage Manager host software version 10.35.xx.xx or higher is required 
to manage DS3000 storage subsystems with controller firmware version 
07.35.41.01 installed.


**********************************************************************

ATTENTION:  PLEASE SEE UPDATED FIRMWARE DOWNLOAD INSTRUCTIONS 
            IN SECTION 2.0

	    This controller firmware update requires the use
	    of the Firmware Download Tool when upgrading
	    controller firmware from version 06.xx to 07.xx

When using the Firmware Upgrade Tool; 

This FIRMWARE UPDATE NEEDS TO BE PERFORMED WHEN NO I/O IS RUNNING 
TO THE DS3000 STORAGE SUBSYSTEM
						
**********************************************************************

ATTENTION: DO NOT DOWNLOAD THIS CONTROLLER FIRMWARE ON ANY OTHER IBM
SYSTEM STORAGE DS STORAGE SUBSYSTEMS. 


(C) Copyright International Business Machines Corporation 1999, 2008. All 
rights reserved. US Government Users Restricted Rights - Use, duplication, 
or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the 
general information in section 6.0 "Trademarks and Notices" in this 
document.

Refer to the IBM System Storage Support Web Site or CD for the IBM DS3000 
Storage Manager version 10 Installation and Support Guides for firmware and 
NVSRAM download instructions.

For other related publications (refer to Related Publications in the 
installation and support guide) and the latest information and updated 
readme file.

NOTE TO SERVICE  Reference RETAIN # N/A

Last Update:   04/03/2009
 
Products Supported: 

    -----------------------------------------------------
   | New Model  | Machine Type |     Model               |
   |------------|--------------|-------------------------|
   |  DS3200    |     1726     | 21x, 22x, 22T, HC2, HC6 |
   |------------|--------------|-------------------------|
   |  DS3300    |     1726     | 31x, 32x, 32T, HC3, HC7 |
   |-----------------------------------------------------|
   |  DS3400    |     1726     | 41x, 42x, 42T, HC4, HC8 |
    -----------------------------------------------------

Notes:  

  1. For the DS3000 storage subsystems the controller firmware 
     version 07.35.41.01 and its associated NVSRAM file must be used. 
                          

=======================================================================
CONTENTS
--------
1.0  Overview
2.0  Installation and Setup Instructions
3.0  Configuration Information
4.0  Unattended Mode
5.0  Web Sites and Support Phone Number
6.0  Trademarks and Notices
7.0  Disclaimer


=======================================================================
1.0   Overview
--------------

   The IBM System Storage DS3000 storage subsystem controller firmware 
   version 07.35.41.02 release includes the DS3000 storage subsystem 
   controller firmware and NVSRAM files to support the IBM DS3000 System 
   Storage DS3200, DS3300 and DS3400 storage subsystems, machine types 
   - 1726 (all models except 22B).
   
   This firmware version will support the IBM DS3000 System Storage 
   DS3200, DS3300 and DS3400 storage subsystems. 
   
   The IBM DS3000 Storage Manager host software version 10.35.xx.xx or 
   higher is required to manage DS3000 storage subsystems with controller 
   firmware version 07.35.41.02 installed.
   
   ATTENTION: DO NOT DOWNLOAD THIS CONTROLLER FIRMWARE ON ANY OTHER IBM
   SYSTEM STORAGE DS STORAGE SUBSYSTEMS.

   Refer to the IBM Support Web Site for the latest Firmware and NVSRAM 
   files and DS3000 Storage Manager host software for the IBM DS3000 
   Storage Subsystems.
   
   http://www.ibm.com/servers/storage/support/disk/

=======================================================================
1.1  Limitations
---------------------

NOTE: For limitations in certain operating system environment, refer to the 
readme file that is included in the DS3000 Storage Manager host software 
package for that operating system environment.

Limitations with versions 07.35.41.02 release.
  
1. DS3300 Linux hardware initiator iSCSI solution is currently only 
   supported when using a version of SANSurfer for iSCSI starting with
   version 5.00.32. 

2. IBM AIX currently only supports the DS3400 storage subsystem.

3. During deletion of a logical drive it is possible that a "ghost" (I.E. a 
   logical drive displayed with a dotted line picture) will be visible.  If 
   this occurs you will need to go to Modify -> Edit Host-to-Logical Drive 
   Mappings.  Then select the logical drive in question and click on the remove 
   option.  This will destroy the "ghost" logical drive.
   
4. Arrays created using RAID levels 3,5, or 6 that will be mapped to an AIX host,
   need to contain at a minimum five (5) hard drives.

5. VMware is currently only supported on the DS3300 using software 
   initiator.

6. There is no Solaris management client for DS3000 storage subsystems.
  

=======================================================================
                
1.2  Enhancements
-----------------

   The DS3000 storage subsystem controller firmware version 07.35.41.01
   used in conjunction with DS3000 Storage Manager 10.35.xx.xx provides 
   support for; 

    - DS3200 Storage Subsystem models 21x, 22x, 22T, HC3, and HC6 which 
      supports the attachment of DS3000 EXP3000 Storage Expansion Enclosures. 

    - DS3300 Storage Subsystem models 31x, 32x, 32T, HC3, and HC7 which 
      supports the attachment of DS3000 EXP3000 Storage Expansion Enclosures. 

    - DS3400 Storage Subsystem models 41x, 42x, 42T, HC3, and HC8 which 
      supports the attachment of DS3000 EXP3000 Storage Expansion Enclosures. 

   The following is a summary of minimum and maximum number of hard disk
   drives supported for each controller RAID configuration:
   
   RAID Level	Min. Drives		Max. Drives
   RAID 0	   2			   48
   RAID 1/10	   2			   48
   RAID 3	   3			   30
   RAID 5	   3			   30
   RAID 6	   5			   30
    
   
   The corresponding change history file has more information on controller 
   firmware new features and updates.
   
=======================================================================
            
1.3  Prerequisites
------------------

     The DS3000 controller firmware and NVSRAM file that are packaged 
     with this README file can ONLY be loaded onto the following DS3000
     storage subsystems:
     
     - DS3200 storage subsystems with or without EXP3000 drive
       expansion enclosures attached. 
 
     - DS3300 storage subsystems with or without EXP3000 drive
       expansion enclosures attached. 

     - DS3400 storage subsystems with or without EXP3000 drive
       expansion enclosures attached. 
         
     The IBM DS3000 Storage Manager host software version 10.35.xx.xx is 
     required to manage DS3000 storage subsystems with controller firmware 
     version 07.35.41.01 installed.


=======================================================================
            
1.4  Dependencies
-----------------

ATTENTION: Always check the README files (especially the Dependencies 
 	   Section) that are packaged together with the firmware files 
   	   for any required minimum firmware level requirements and the 
   	   firmware download sequence for the EXP3000 drive expansion 
   	   enclosure ESM, the DS3000 storage subsystem controller and the 
   	   hard drive firmware.
       
   1. IBM DS3000 storage subsystem must be running one of the following 
      controller firmware versions prior to upgrading to controller firmware 
      version 07.35.41.02;

      06.70.22.00, 
      06.70.24.00, 
      06.70.69.00,
      07.35.41.00, or
      07.35.41.001 

   
   2. IBM DS3000 Storage Manager host software version 10.35.xx.xx is 
      required to manage DS3000 storage subsystems with controller firmware 
      version 07.35.41.02 installed.
      
   3. EXP3000 drive expansion enclosure ESM firmware version 01.96 or greater
      is required for this release.      
      

=======================================================================
        
1.5 Level Recommendation for the update
-----------------------------------------

     1. Storage Controller Firmware versions:
        a. DS3200: FW_DS3200_07354102
	b. DS3300: FW_DS3300_07354102
	c. DS3400: FW_DS3400_07354102
                                                       
     2. Storage Controller NVSRAM versions: 
        a. DS3200 - Single Controller: N1726D32LR335V02.dlp                  
        b. DS3200 - Dual Controller  : N1726D320R335V06.dlp 
        
        c. DS3300 - Single Controller: N1726D33LR335V02.dlp                  
        d. DS3300 - Dual Controller  : N1726D330R335V05.dlp
         
        e. DS3400 - Single Controller: N1726D34LR335V02.dlp                  
        f. DS3400 - Dual Controller  : N1726D340R335V05.dlp 

       
      Note: The DS3000 storage subsystems that are shipped from the factory
            may show the NVSRAM version with a different first character 
            prefix other than the "N" prefixed as stated. As long as 
            the rest of the version information after the first 
            character are the same, both the manufacturing NVSRAM 
            version and the "N" prefixed NVSRAM version are the same. 
            You do not need to update your DS3000 storage subsystem with 
            the  "N" prefixed NVSRAM version as stated above. For 
            example, for a DS34000, the N1726D340R917V15 and 
            M1726D340R917V15 (or C1726D340R917V15 or D1726D340R917V15, 
            etc...) versions are the same because both versions share 
            the same "1726D340R917V15" string. The M1726D340R917V15 (or 
            C1726D340R917V15 or D1726D340R917V15, etc...) version was 
            loaded to the DS3400 storage subsystem at the factory. The 
            N1726D340R917V15 version is the one that was posted to the 
            DS3000 support web site for download.             
                                          
   Refer to the following IBM System Storage Disk Storage Systems 
   Technical Support web site for the latest released code levels.
  
   http://www.ibm.com/servers/storage/support/disk/
   
=======================================================================
              
2.0   Installation and Setup Instructions
-----------------------------------------

ATTENTION: If you have not already done so, please check the Dependencies 
           section for ANY MINIMUM FIRMWARE REQUIREMENTS for the DS3000 
	   storage server controllers, the drive expansion enclosure ESMs 
	   and the hard drives in the DS3000 configurations before upgrading 
	   the controller firmware. 
					 
	   Check the information below to ensure the firmware update order
	   BEFORE proceeding to upgrade the DS3000 controller firmware and 
	   NVSRAM files packaged with this README file. 
					 
	   FAILURE to observe the minimum firmware requirement might 
	   cause your DS3000 storage subsystem to be OUT-OF-SERVICE.

NOTE:  Prior to performing the firmware update.  Please save a support
       archive and then clear the Major Event Log.

ATTENTION: The upgrade to controller firmware version 07.35.41.02 from
	   controller firmware version 06.xx will require the user to 
           schedule the firmware download during a maintenance window 
	   when no I/O is running on the storage subsystem.  Do not 
	   attempt to upgrade the controller firmware while I/O is 
 	   running to the storage subsystem. 

2.1  Controller Firmware and NVSRAM Upgrade

2.1.1 Controller Firmware and NVSRAM Upgrade from controller firmware
      version 06.xx using the Controller Firmware Upgrade Tool                
               
     To download the controller firmware and NVSRAM, perform the following 
     steps: 
     
NOTE:  More detailed information on how to use the Firmware Upgrade Tool can
       be found in "Appendix B. Using the IBM System Storage DS3000 Controller 
       Firmware Upgrade Tool" of the "System Storage DS3000 Storage Manager 
       Version 10 Installation and Support Guide".     
   
     a.  Download Storage Manager version 10.35 from the IBM System
         Storage Technical Support website and install the 
         application.

     b.  Launch the Firmware Upgrade Tool application.
     
     c.  Add the DS3000 storage subsystem using either the Automatic
         discovery or Manual addition. 
         
     d.  Check the Firmware Upgrade Tool and ensure that the storage 
         subsystem status is OPTIMAL.  If not, correct any issues before
         beginning the firmware upgrade process.
         
     e.  Click the Download Firmware button which will launch the Firmware 
         Download screen.
         
     f.  From the Firmware Download screen, use the Browse button to select 
     	 the controller firmware file and the NVSRAM file that will be 
     	 downloaded to the DS3000 storage subsystem, then select the OK button.
                  
     g.  The Firmware Download Tool will provide a progress bar for 
         download process.  After the files have been downloaded to 
         the storage subsystem, the Firmware Download Tool will show
         a status of Activating.
     
     NOTE:  The controller firmware activation procedure can take
            as long as 30 minutes to complete.
            
                
     e.  After the firmware has been activated, a status of Firmware
     	 OK will indicate the download and activation have completed
     	 successfully.



2.1.2 Controller Firmware and NVSRAM Upgrade from controller firmware
      version 07.xx                


NOTE:  It is a best practice to schedule the firmware download during a 
       maintenance window when no I/O is running on the storage subsystem.

               
     To download the controller firmware and NVSRAM, perform the following 
     steps: 
     

     To download firmware, do the following: 
   
     a.  Open the Subsystem Management window. 
     b.  Click Support tab => Download Firmware => Download Controller
         Firmware.
         
         Follow the online instructions.

     To download NVSRAM, do the following: 
   
     a.  Open the Subsystem Management window. 
     b.  Click Support tab => Download Firmware => Download Controller 
         NVSRAM.
           
         Follow the online instructions.
       


2.2  For this DS3000 firmware release, update the controller firmware 
     prior to updating the ESM firmware in the attached drive expansion
     enclosures to latest levels.
     
     To download drive expansion ESM firmware, do the following: 
   
     a.  Open the Subsystem Management window.
 
     b.  Click Support tab => Download Firmware => Environmental(ESM) 
         Card Firmware. 
         
     c.  Follow the online instructions.
     
       
2.3  After the controller firmware, NVSRAM, and ESM firmware is updated, 
     consider checking the IBM System Storage Disk Storage Systems 
     Technical Support web site for the latest released hard drive firmware. 
     
     To download hard disk drive firmware, do the following: 
   
     a.  Schedule down time because the drive firmware upgrades require that 
         there are no HOST IOs to be sent to the DS3000 controllers.

     b.  Open the Subsystem Management window.
 
     c.  Click Support tab => Download Firmware => Download Drive Firmware. 
         
         Follow the online instructions. 
         
         Note: with controller firmware version 07.35.41.01 or later, multiple 
         drives from up to four different drive types can be updated at the 
         same time. 
      

=======================================================================
                                
3.0  Helpful Hints 
------------------

1. The IBM System Storage DS3000 Storage Manager version 10 Installation 
   and Support Guide for Microsoft Windows Server, Linux, Novell 
   Netware, and VMWare ESX Server are available on IBM's Support Web Site
   as a down-loadable Portable Document Format (PDF) file.
   
2. The IBM System Storage DS3000 Storage Manager version 10 Installation 
   and Support Guide for AIX and Linux on POWER is available on IBM's 
   Support Web Site as a down-loadable Portable Document Format (PDF) file. 

3. The DS3000 Premium Feature - storage partitioning, plus Copy Services 
   Premium Features - FlashCopy, VolumeCopy and FlashCopy VolumeCopy 
   - are options purchased separately. 
   
4. Enablement of the 07.35.41.02 controller firmware provides support for up 
   to 4 storage partitions for the DS3200, DS3300 and DS3400 . If additional 
   storage partitions are needed, various storage partition feature upgrade 
   options can be purchased to increase the maximum number of supported storage      
   partitions.
   
5. The Storage Manager (SM) host software version 10.35 client script 
   window looks for the files with the file type of  ".script" as the possible
   script command files.
   
6. If the management port is connected to a network infrastructure that will 
   periodically be performing security port scans, please ensure that the 
   switch port that connects to the management port(s) is set to auto-negotiate.  
   In some instances, when a port is set to a dedicated link speed, after a port 
   scan the management port will become unresponsive and will not recover until 
   after the storage subsystem is power cycled. 
   

=======================================================================

4.0 Configuration Information
-----------------------------

        
4.1 Configuration Settings
--------------------------

1. By default the Storage Manager 10.35 software does not 
   automatically map logical drives if storage partitioning feature is
   enabled. This means that the logical drives are not automatically 
   presented to host systems. 
                                          
   Refer to the IBM DS3000 Storage Manager documentation or online help 
   to learn more about creating storage partitions and changing host types.

2. When you are configuring the DS3300 or DS3400 storage subsystems as 
   boot devices, contact IBM support for supported configurations and 
   instructions for configuring LUNs in the IBM storage subsystems as 
   boot devices. 

=======================================================================

4.2 Unsupported configurations
------------------------------

   The configurations that are currently not being supported with controller 
   firmware version 07.35.41.02 in conjunction with DS3000 Storage Manager 
   version 10.35 are listed below:

   1. A configuration in which either a software or hardware iSCSI initiator
      is directly connected to a DS3300 storage subsystem.
      
   2. A configuration in which the host is connected to a iSNS server using 
      only IPv4 and the DS3300 is connected to the iSNS server using only 
      IPv6.
      

=======================================================================

5.0   Unattended Mode
---------------------
        N/A

=======================================================================

6.0   WEB Sites and Support Phone Number
----------------------------------------

   6.1  IBM System Storage Disk Storage Systems Technical Support web site:
        http://www.ibm.com/servers/storage/support/disk/

   6.2  IBM System Storage Marketing Web Site:
        http://www.ibm.com/servers/storage/disk

   6.3  If you have any questions about this update, or problem
        applying the update go to the following HelpCenter World
        Telephone Numbers URL:
        http://www.ibm.com/planetwide

  IMPORTANT: 
  You should download the latest version of the DS3000 Storage Manager 
  host software, the DS3000 storage subsystem controller firmware, the EXP3000
  drive expansion enclosure ESM firmware and the drive firmware at the 
  time of the initial installation and when product updates become 
  available. To be notified of important product updates, you must first 
  register at the IBM Support and Download Web site: 
  
  http://www.ibm.com/servers/storage/support/disk/
  
  Perform the following steps to register at the IBM Support and Download 
  Web site: 
  
  1. Click on My Support in the Additional Support box in the right side 
     of the DS3000 Support web page.
  2. The Sign In window displays. Either enter your IBM ID and Password 
     in the sign in area to sign in and proceed to step 6 or, if you are 
     not currently registered with the site, click Register Now. 
  3. The My IBM Registration window Step 1 of 2 opens. Enter the 
     appropriate information and click Continue to get to the second My 
     IBM Registration window. 
  4. In the My IBM Registration window Step 2 of 2, enter the appropriate 
     information and click Submit to register. 
  5. The My IBM Registration windows opens with the following message, 
     Thank you for registering with IBM.com. Continue to explore ibm.com 
     as a registered user. Click Edit Profile in the My IBM box on the 
     right side of the window. 
  6. The My Support window opens. Click Add Products to add products to 
     your profile. 
  7. Use the pull-down menus to choose the appropriate DS3000 storage 
     server and expansion enclosures that you want to add to your profile.
     To add the product to your profile, select the appropriate box or 
     boxes next to the product names and click Add Product. 
  8. Once the product or products are added to your profile, click 
     Subscribe to Email folder tab 
  9. Select Storage in the pull down menu. Select Please send these 
     documents by weekly email and select Downloads and drivers and 
     Flashes to receive important information about product updates. 
     Click Updates. 
 10. Click Sign Out to log out of My Support.
 
=======================================================================

7.0   Trademarks and Notices
----------------------------

        7.1  The following terms are trademarks of the IBM Corporation
             in the United States or other countries or both:

                 IBM
                 
                 DS3000
                 
                 FAStT
                 
                 System Storage 

                 the e-business logo

		             System x

                 xSeries
                 
                 pSeries

                 HelpCenter

                 Microsoft, Windows, and Windows NT are trademarks of Microsoft
                 Corporation in the United States, other countries, or both.
                
                 Java and all Java-based trademarks and logos are trademarks or
                 registered trademarks of Sun Microsystems, Inc. in the United
                 states, other countries, or both.

                 UNIX is a registered trademark of The Open Group in the United 
                 States and other countries.

                 Linux is a registered trademark of Linus Torvalds.

                 Other company, product, and service names may be 
                 trademarks or service marks of others.

=======================================================================

8.0   Disclaimer
----------------

        8.1  THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF
             ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS
             OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
             WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
             MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS
             DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO
             LICENSES TO ANY PATENTS OR COPYRIGHTS.


        8.2  Note to U.S. Government Users -- Documentation related to
             restricted rights -- Use, duplication or disclosure is
             subject to restrictions set forth in GSA ADP Schedule
             Contract with IBM Corporation.

