If you plan to configure logical partitions, install the server into a rack, use the Virtual Partition Manager, set up the Hardware Management Console (HMC), or install the HMC into a rack, then use this checklist to help you set up your system.
If you need help setting up the HMC, contact your next level of support or your hardware service provider.
For a successful installation, complete the following tasks in order.
| Before you begin | |||
|---|---|---|---|
| __ | Good planning is essential for the successful setup and use of your server. The customized Planning Checklist provides you with the planning tasks you need to perform. Have you completed the Planning Checklist?
|
||
| __ | (Optional) To improve performance or availability, move and set up the physical hardware according to your Logical Partition Validation Tool (LVT) output. |
||
| __ | Ensure that you have completed the tasks from the Quick start guide for IBM System i5™ 520 |
||
If you have not completed these tasks, links to this information are also available below. |
|||
or | Initial server setup checklist | Printable PDFs | |||
|---|---|---|---|---|
| 1. | Install the server into a rack. Note: Due to tipping considerations and for your safety
and that of the equipment, IBM does
not ship the 7014 series model T42 or 0553 system racks populated above the
36U mark. Some additional installation of rack-mounted units might be required.
|
Installing
the rack, rack features, and system or expansion unit into a rack |
||
| 2. | Select the method you will use to create logical partitions. | |||
| • | HMC | |||
| __ |
Attention: Do not connect the server to a power
source.
|
|||
| __ | ||||
| __ | ||||
| __ | Deploy a system plan or Partition a new or nonpartitioned server. |
Partitioning
for AIX® with
an HMC |
||
| • | Virtual Partition Manager | |||
| __ |
Attention: Do not connect the server to a power
source.
|
|||
| __ | ||||
| __ | Create logical partitions with the Virtual Partition Manager. |
Virtual Partition Manager:
A Guide to Planning and Implementation. |
||
| 3. | Select one or more operating systems to
install. Note: If you are partitioning your server with the Virtual Partition Manager,
you must install both the i5/OS and Linux operating systems; AIX is not supported
at this time.
|
|||
| • | AIX | |||
| __ | Install AIX using the CD-ROM device or Install AIX using Network Installation Management
(NIM). Refer to Installing with Network Installation Management in Installing AIX |
|||
| • | i5/OS | |||
| __ | ||||
| • | Linux | |||
| __ | ||||
| 4. | ||||
| 5. | Get fixes. | |||
| __ | ||||
| __ | ||||
| __ | ||||
| After you finish | |||
|---|---|---|---|
| __ | (Optional) Complete additional setup tasks. |
||