HSCL11xx backup and restore error codes

These error codes can be displayed in a window that is displayed on the HMC screen during system configuration and operations.
Back to HSCL error codes page
HSCL11xx error codes Message Recovery action
HSCL1195 Unable to back up the profile data to the backup file. Try again.
  1. Try the task again.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1196 You do not have read access permission on the backup file {0}. Refresh the interface and check whether the operation was completed. If not, try the operation again.
  1. Try the task again.
  2. If the operation still fails, contact your next level of support or your service provider.
HSCL1197 Unable to read the profile data's backup file {0}. Refresh the interface and check whether the operation was completed. If not, try the operation again.
  1. Try the task again.
  2. Shut down and restart the HMC, and then try the task again.
  3. If the operation still fails, contact your next level of support or your service provider.
HSCL1198 Cannot find backup file {0} for profile data. Select a valid, existing backup file.
  1. Try the task again.
  2. If the operation still fails, contact your next level of support or your service provider.
HSCL1199 A full restore is not permitted when there are logical partitions in {0} state. A full restore can only be issued when the managed system was powered on and all partitions are in the Not Activated state.
  1. Verify the managed system was powered-on to run in Partition Standby.
  2. Try the task again.
  3. If the operation still fails, contact your next level of support or your service provider.
HSCL119A There was an I/O error while backing up the profile data. Try again.
  1. Try the task again.
  2. Shut down and restart the HMC, and then try the task again.
  3. If the operation still fails, contact your next level of support or your service provider.
HSCL119B The restore profile data operation failed. Try again.
  1. Try the task again.
  2. Shut down and restart the HMC, and then try the task again.
  3. If the operation still fails, contact your next level of support or your service provider.
HSCL119C Cannot initialize profile data when the managed system was not in the Standby or Operating state, or there is any partition not in the Not Activated state.
  1. Verify that the managed system is in the Standby or Operating state, and that no logical partitions are running.
  2. Try the task again.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL119D Cannot restore the profile data if the managed system is in the {0} state.
  1. Verify that the managed system is in the Standby or Ready state, and try the task again.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL119E Cannot initialize the profile data if the managed system is in the {0} state.
  1. Verify that the managed system is in the Standby or Ready state, and try the task again.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL119F The backup file {0} used to restore the profile data is not valid. Its file size {1} is not correct. Select a valid backup file. The backup file selected is not valid. The file might be corrupted.
  1. Try the task again.
  2. Select another backup file and try the task again.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL11A0 Cannot restore the profile data if the managed system is in the {0} state. The managed system must be in the Operating or Standby state.
  1. Verify that the managed system is in Operating or Standby state.
  2. Try the task again.
HSCL11A1 Cannot initialize the profile data if the managed system is in the {0} state. The managed system must be in the Operating or Standby state.
  1. Verify that the managed system is in Operating or Standby state.
  2. Try the task again.
HSCL11A2 Could not display the backup dialog for the managed system: {0}. Try the operation again.
  1. Try the task again.
  2. Log off the HMC, and then log back in.
  3. Try the task again.
  4. If the problem persists, contact your next level of support or your service provider.
HSCL11A3 Could not back up the profile data for the managed system: {0} to file {1}.
  1. Refresh the graphical user interface. For details, see Updating managed system or frame information.
  2. Try the task again.
  3. Shut down and restart the HMC, and then try the task again.
  4. If the problem persists, contact your next level of support or your service provider.
HSCL11A4 Cannot back up profile data to the default backup file name {0}. Cannot back up the profile data to the default backup file. Choose a different backup file name. If the problem persists, contact your next level of support or your service provider.
HSCL11A5 Could not display the remove backup dialog for the managed system {0}. Try again.
  1. Try the task again.
  2. Log off the HMC, and log back in.
  3. Try the task again.
  4. contact your next level of support or your service provider.
HSCL11A6 Could not remove the backup file {0} from the managed system {1}.
  1. Refresh the graphical user interface. For details, see Updating managed system or frame information.
  2. Try the task again.
  3. Shut down and restart the HMC, and then try the task again.
  4. If the problem persists, contact your next level of support or your service provider.
HSCL11A7 No backup file has been selected for the operation. Select a backup file. If the problem persists, contact your next level of support or your service provider.
HSCL11A8 Could not display the restore profile data dialog for the managed system: {0}. Try the operation again.
  1. Try the task again.
  2. Log off the HMC, and then log back in.
  3. Try the task again.
  4. If the problem persists, contact your next level of support or your service provider.
HSCL11A9 Could not initialize the profile data task on the managed system {0}. Refresh the interface and check whether the operation was performed. If not, try the operation again.
  1. Refresh the graphical user interface. For details, see Updating managed system or frame information.
  2. Ensure the operation has been performed and displays on the graphical user interface.
  3. If not, repeat the operation.
  4. If the problem persists, contact your next level of support or your service provider.
HSCL11AA Could not restore the profile data task on the managed system {0} with backup file {1} of {2} option. Refresh the interface and check whether the operation was performed. If not, try the operation again.
  1. Refresh the graphical user interface. For details, see Updating managed system or frame information.
  2. Try the task again.
  3. Rebuild the managed system. For details, see Updating managed system or frame information. Then try the task again.
  4. If the problem persists, contact your next level of support or your service provider.
HSCL11AB Could not display the recover partition data dialog for the managed system {0}.
  1. Try the task again.
  2. Log off the HMC, and then log back in.
  3. Try the task again.
  4. If the problem persists, contact your next level of support or your service provider.
HSCL11AC Could not perform the recover logical partition data task on the managed system {0}.
  1. Refresh the graphical user interface. For details, see Updating managed system or frame information.
  2. Try the task again.
  3. Rebuild the managed system. For details, see Updating managed system or frame information.
  4. If the problem persists, contact your next level of support or your service provider.
HSCL11AD Could not display the Rebuild Computer System dialog for managed system {0}.
  1. Refresh the graphical user interface and retry the operation. For details, see Updating managed system or frame information.
  2. If the problem persists, contact your next level of support or your service provider.
Parent topic: HMC error codes
Send feedback | Rate this page