HSCL15xx CIMOM error codes

These error codes can be displayed in a window that is displayed on the HMC screen during system configuration and operations.
Back to HSCL error codes page
HSCL15xx error codes Message Recovery action
HSCL150B Cannot change the I/O pools of the partition since the partition is still using an I/O adapter participating in one of the pool IDs.  
HSCL150C Cannot use the I/O adapter: {0} since the partition is not part of the pool this adapter belongs to.  
HSCL150D Cannot use the I/O adapter: {0} because it is not available.
  1. Retry the task.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL150E Cannot use the I/O adapter: {0} since it is configured under an I/O unit marked as switchable.  
HSCL150F Cannot vary off the I/O adapter: {0} because it is still in use by the partition.  
HSCL1510 This I/O adapter is marked as multi-hub reserving for shark partition.  
HSCL1511 Cannot use the I/O adapter: {0} because it is either used by another partition or an allocation is already in progress.  
HSCL1512 Cannot vary off the I/O adapter: {0} because the partition is not ready to release the adapter  
HSCL1513 Cannot change the OptiConnect setting since the communication with the partition is still active.  
HSCL1514 The virtual I/O slot number specified is not valid.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL1515 Cannot use a virtual slot number greater or equal to the maximum number of virtual slots allowed with this partition.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL1516 Cannot specify additional virtual LAN IDs since this virtual Ethernet adapter is not IEEE compatible.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL1517 The virtual slot number specified to query or set virtual slot information is not valid.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL1518 The virtual slot state specified is not valid.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL1519 The number of virtual slots specified is not valid.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL151A A virtual Ethernet trunk adapter with the same MAC address already exists.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL151B Unable to delete the partition when there is a virtual terminal connection opened.
  1. Close the terminal session for the partition you want to delete.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL151C Server adapter setting of the virtual slot: {0} is not valid.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL151D The virtual adapter: {0} cannot be set up for HMC connection.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL151E Cannot have multicast MAC address for the virtual Ethernet trunk adapter.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL1523 Shared pool ID specified is not valid.
  1. Ensure that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL152A Cannot change the managed system from the manufacturing default configuration because a partition is running with a device that does not support extended error handling (EEH).  
HSCL152D The managed system is not ready for the Hardware Management Console to extract partition and resource information.
  1. Retry the task.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1537 The partition is not responsive for dynamic resource configuration changes.
  1. Retry the task.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1538 There is an insufficient amount of memory for maintaining system firmware.  
HSCL1539 Memory configuration for the partition cannot be satisfied due to system memory usage limitation.  
HSCL1550 Firmware command: {0} failed due to the following {1} errors: {2}
  1. Retry the task.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1551 The firmware extended error code is {0}.
  1. Retry the task.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1552 The firmware operation failed with extended error.
  1. Retry the task.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1553

This operation cannot be performed because there is an insufficient number of unallocated processors for the i5/OS® partitions.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1554

This operation cannot be performed because there is an insufficient number of unallocated processing units for the i5/OS partitions.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1555 The virtual I/O adapter configuration is not valid. If the remote partition and the remote partition virtual slot number are configured, make sure they are not the same number as the partition number and slot number of the virtual I/O adapter.  
HSCL1556

The virtual I/O adapter cannot be configured as a server adapter. The configuration is not allowed under the partition specified. The partition must be an i5/OS partition in an IBM® System i5, eServer™ i5 system, or a virtual I/O server partition.

  
HSCL157D Unable to query the association within the managed system. Log in as the proper user and use the correct association method.  
HSCL157E Unable to edit instance of {0}. Check user permissions, then log in as the proper user and try editing again.
  1. Check your user role's permissions.
  2. If your user role does not permit the desired action, log out and log back in as the correct user, and retry the operation.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL157F Cannot find an instance of the object specified. Either there is no instance and it must be created or a path to the object was incorrect.
  1. Ensure that the inputs are correct.
  2. Rebuild the managed system. For details, see Updating managed system or frame information. Then try the task again.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL1580 Improper number of arguments passed in: passed in = {0}, expected = {1}. Check the parameters of the invoked method.
  1. Verify that the command is being called correctly, and try the task again.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1581 The method name {0} passed in the invoke method does not match the name of the method you are trying to invoke. Check the method name and the required parameters.
  1. Retry the task.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1582 The wrong path is being used for the object manager - {0}. Check the code for build CIMObjectPath and its contents.
  1. Retry the task.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1583 The wrong object manager method is being invoked.
  1. Retry the task.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL1584 You do not have the proper authorization or permission to perform this task. Log in as the proper user and try again. Log in with appropriate permissions to perform the task. If the problem persists, contact your next level of support or your service provider.
HSCL1585 There was an unknown error while querying the object manager database.
  1. Try the task again.
  2. Shut down and restart the HMC.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL1586 Cannot find an instance with object manager of {0}.
  1. Check the input.
  2. Rebuild the managed system. For details, see Updating managed system or frame information. Then try the task again.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL1588 An exception was encountered while calling the method named {0}.
  1. Retry the operation.
  2. If the problem persists, rebuild the managed system. For details, see Updating managed system or frame information.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL159B The group number is invalid. Group numbers cannot contain any letters or characters other than the numbers 0 through 9. Enter the new group number again without alphabetic characters.
HSCL159C The Workload Management group number has to be between {0} and {1}. Enter a number inside the valid range for workload management group numbers.
HSCL15E7 The profile you tried to activate does not belong to the partition {0} you specified. Select the correct partition profile. Verify that you selected the correct logical partition profile to activate. If the operation still fails, contact your next level of support or your service provider.
Parent topic: HMC error codes
Send feedback | Rate this page