HSCL90xx error codes

These error codes can be displayed in a window that is displayed on the HMC screen during system configuration and operations.

Back to HSCL error codes page

HSCL90xx error codes	Message	Recovery action
HSCL9000	This operation is not allowed because Capacity on Demand is not supported on the managed system.
HSCL9001	The operation has failed on the managed system.	Retry the operation. If the problem persists, contact your next level of support or your service provider.
HSCL9003	The operation has failed on the managed system. Retry the operation. If the failure persists, contact your hardware service representative.	Retry the operation. If the problem persists, contact your next level of support or your service provider.
HSCL9004	The information could not be retrieved from the managed system.	Retry the operation. If the problem persists, contact your next level of support or your service provider.
HSCL9005	The information could not be retrieved from the managed system. contact your next level of support or your service provider.	Retry the operation. If the problem persists, contact your next level of support or your service provider.
HSCL9006	The information could not be retrieved from the managed system. Retry the operation. If the problem persists, contact IBM^® support.	Retry the operation. If the problem persists, contact your next level of support or your service provider.
HSCL9007	This operation is not allowed because Capacity on Demand for processors is not supported on the managed system
HSCL9008	This operation is not allowed because Capacity on Demand for memory is not supported on the managed system.
HSCL9009	This operation is not allowed because Capacity Upgrade on Demand for processors is not supported on the managed system.
HSCL900A	This operation is not allowed because Capacity Upgrade on Demand for memory is not supported on the managed system.
HSCL900B	This operation is not allowed because On/Off Capacity on Demand for processors is not supported on the managed system.
HSCL900C	This operation is not allowed because On/Off Capacity on Demand for memory is not supported on the managed system.
HSCL900D	This operation is not allowed because Reserve Capacity on Demand is not supported on the managed system.
HSCL900E	This operation is not allowed because Trial Capacity on Demand for processors is not supported on the managed system.
HSCL900F	This operation is not allowed because Trial Capacity on Demand for memory is not supported on the managed system.
HSCL9010	This operation is only allowed when the managed system is in the Standby or Operating state.	Ensure that the managed system is in the Operating or Standby state, and then try the operation again. If the problem persists, contact your next level of support or your service provider.
HSCL9011	This operation is not allowed because unreturned On/Off CoD processors are currently in use on the managed system. Remove the On/Off CoD processors from partitions to make them available to be reclaimed by the system, then try the operation again.	Currently there are unreturned On/Off CoD processors in use on the managed system. Before this operation is allowed they must be made available to be reclaimed by the system. Check the number of unreturned On/Off CoD processors, and then remove processors from partitions, if necessary, until the number of available processors is equal to or greater than the number of On/Off CoD processors that were unreturned. To remove them, either use dynamic partitioning to remove the On/Off CoD processors from a running partition, or shut down and then delete the partition to release the processors. Retry the operation.
HSCL9012	This operation is not allowed because unreturned On/Off CoD memory is currently in use on the managed system. Remove the On/Off CoD memory from partitions to make it available to be reclaimed by the system, then try the operation again.	Remove the On/Off CoD memory from partitions to make it available to be reclaimed by the system, then try the operation again.
HSCL9013	This operation is not allowed because unreturned Trial CoD processors are currently in use on the managed system. Immediately remove the Trial CoD processors from partitions to make them available to be reclaimed by the system, or enter a CUoD processor activation code to permanently activate this capacity.	Immediately remove the Trial CoD processors from partitions to make them available to be reclaimed by the system, or enter a CUoD processor activation code to permanently activate this capacity.
HSCL9014	This operation is not allowed because unreturned Trial CoD memory is currently in use on the managed system. Immediately remove the Trial memory from partitions to make it available to be reclaimed by the system, or enter a CUoD memory activation code to permanently activate this capacity.	Immediately remove the Trial memory from partitions to make it available to be reclaimed by the system, or enter a CUoD memory activation code to permanently activate this capacity.
HSCL9015	The managed system cannot currently process this operation. This condition is temporary. Retry the operation.	The managed system is busy, but the condition is temporary. Retry the operation after a period of time. If the condition persists, contact your next level of support or your service provider.
HSCL9016	You did not enter the CoD code correctly. Try again.	The CoD code was entered incorrectly. Try the operation again by carefully re-entering the code exactly as it was given to you.
HSCL9017	{0} The sequence number of the CoD code indicates that this code has been used before. Obtain a new CoD code and try again.	The CoD code that was entered has been used before and cannot be used more than once. Check to make sure you are entering a new CoD code and try again.
HSCL9018	{0} The CoD feature for which the CoD code was generated is not supported on the managed system.	The CoD feature for which this CoD code was generated is not supported on the managed system. Verify that the CoD code you are trying to enter was generated for the managed system on which you are trying to enter it.
HSCL9019	The CoD code has been rejected by the managed system because too many invalid CoD codes have been entered. The managed system must be rebooted before another CoD code will be accepted.	Restart the HMC. Try the task again with a valid CoD code.
HSCL901A	{0} Not enough inactive processors are available to accept this CoD code because On/Off CoD processors are currently activated. Remove some On/Off CoD processors from partitions, if necessary, to make them available to be reclaimed by the system. Then deactivate those On/Off CoD processors to reduce the number of activated On/Off CoD processors, and enter the CUoD processor activation code again.	Currently, there are not enough inactive processors available to accept this CoD code for CUoD processors, because On/Off processors are currently activated. Check the number of available processors, and then remove processors from logical partitions, if necessary, until the number of available processors is equal to or greater than the number of On/Off processors that have been activated. To do this, either use dynamic partitioning to remove the On/Off CoD processors from a running partition, or shut down and then delete the partition to release the processors. If the problem persists, contact your next level of support or your service provider.
HSCL901B	{0} Not enough inactive memory is available to accept this CoD code because On/Off CoD memory is currently activated. Remove some On/Off CoD memory from partitions, if necessary, to make it available to be reclaimed by the system. Then deactivate that On/Off CoD memory to reduce the amount of activated On/Off CoD memory, and enter the CUoD memory activation code again.	There is not enough inactive memory currently available to accept this CUoD memory activation code, because On/Off CoD memory is currently activated. Check the amount of available system memory, and then remove memory from partitions, if necessary, until the amount of available system memory is equal to or greater than the amount of On/Off CoD memory that has been activated. (Use dynamic partitioning to remove memory from one or more running partitions, or delete one or more shut down partitions to release memory.) Deactivate the On/Off CoD memory. Retry the operation.
HSCL901C	{0} There are not enough inactive processors available to accept this CoD code because Trial CoD processors are currently activated. Either wait until the current Trial CoD activation period expires, or stop the current trial. Then enter the CUoD processor activation code again.	Wait until the current Trial CoD activation period expires, or stop the current trial. Retry the operation.
HSCL901D	{0} There is not enough inactive memory available to accept this CoD code because Trial CoD memory is currently activated. Either wait until the current Trial CoD activation period expires, or stop the current trial. Then enter the CUoD memory activation code again.	Wait until the current Trial CoD activation period expires, or stop the current trial. Retry the operation.
HSCL901E	{0} Not enough inactive processors are available to accept this CoD code because On/Off CoD processors and Trial CoD processors are currently activated. Remove some On/Off CoD processors or Trial CoD processors from partitions, if necessary, to make them available to be reclaimed by the system. Then deactivate those On/Off CoD and/or Trial CoD processors to reduce the number of activated CoD processors, and enter the CUoD processor activation code again.
HSCL901F	{0} Not enough inactive memory is available to accept this CoD code because On/Off CoD memory and Trial CoD memory are currently activated. Remove some On/Off CoD memory or Trial CoD memory from partitions, if necessary, to make it available to be reclaimed by the system. Then deactivate that On/Off CoD and/or Trial CoD memory to reduce the amount of activated CoD memory, and enter the CUoD memory activation code again.
HSCL9020	{0} The CoD code cannot be accepted because Trial CoD processors are already activated on the managed system.	A Trial processor code cannot be accepted when Trial CoD processors are already activated.
HSCL9021	{0} The CoD code cannot be accepted because Trial CoD memory is already activated on the managed system.	A Trial memory code cannot be accepted when Trial CoD memory is already activated. Wait until the current Trial CoD activation period expires, or stop the current Trial. Retry the operation.
HSCL9022	{0} Not enough inactive processors are available to accept this CoD code because On/Off CoD processors are currently activated. Remove some On/Off CoD processors from partitions, if necessary, to make them available to be reclaimed by the system. Then deactivate those On/Off CoD processors to reduce the number of activated On/Off CoD processors, and enter the Trial processor code again.	There are not enough inactive processors currently available to accept this Trial processor code, because On/Off CoD processors are currently activated. Check the number of available system processors, and then remove processors from partitions, if necessary, until the number of available system processors is equal to or greater than the number of On/Off CoD processors that have been activated. (Use dynamic partitioning to remove processors from one or more running partitions, or delete one or more shut down partitions to release the processors.) Deactivate the On/Off CoD processors. Retry the operation.
HSCL9023	{0} There is not enough inactive memory available to accept this CoD code because On/Off CoD memory is currently activated. If necessary, remove memory from partitions until the amount of On/Off CoD memory that is activated has been made available to be reclaimed by the system. Then deactivate the On/Off CoD memory, and reenter the Trial memory code.	There is not enough inactive memory currently available to accept this Trial memory code, because On/Off CoD memory is currently activated. Check the amount of available system memory, and then remove memory from partitions, if necessary, until the amount of available system memory is equal to or greater than the amount of On/Off CoD memory that has been activated. (Use dynamic partitioning to remove memory from one or more running partitions, or delete one or more shut down partitions to release the memory.) Deactivate the On/Off CoD memory. Retry the operation.
HSCL9024	{0} The CoD code cannot be accepted because On/Off CoD resources are currently activated. If necessary, remove resources from partitions until the amount of On/Off CoD resources that are activated have been made available to be reclaimed by the system. Then deactivate the On/Off CoD resources, and re-enter the On/Off capacity termination code.	The CoD code to terminate On/Off CoD cannot be accepted, because On/Off resources are currently activated. Check the amount of available resources, and then remove resources from partitions, if necessary, until the amount of available resources is equal to or greater than the amount of resources that have been activated for CoD. Do this by either using dynamic partitioning to remove the On/Off resources from a running partition, or shut down and delete the partition to release the resources. Retry the operation.
HSCL9025	{0} The CoD code cannot be accepted because there are insufficient resources available on the managed system.	If there are temporary CoD resources activated on your system, deactivate them. Retry the operation.
HSCL9026	The number of On/Off CoD processors requested exceeds the number of inactive processors that are currently available on the managed system. Reduce the number of processors requested and try again.	Reduce the number of processors requested. Retry the operation.
HSCL9027	The amount of On/Off CoD memory requested exceeds the amount of inactive memory that is currently available on the managed system. Reduce the amount of memory requested and try again.	Reduce the amount of memory requested so that the amount requested is less than or equal to the amount of inactive memory available for On/Off CoD. Retry the operation.
HSCL9028	Not enough On/Off CoD processor days remain to accept the On/Off CoD processor activation request. Either reduce the number of processors and/or days requested or obtain and enter a new On/Off processor enablement code.	Reduce the number of processors or days requested so that the number of processor days requested (the number of processors multiplied by the number of days) is less than or equal to the number of processor days available for new On/Off CoD requests. Alternatively, obtain and enter a new On/Off processor enablement code.
HSCL9029	Not enough On/Off CoD memory days remain to accept the On/Off CoD memory activation request. Either reduce the amount of memory and/or number of days requested or obtain and enter a new On/Off memory enablement code.	Reduce the amount of memory or number of days requested so that the number of memory days requested (the GBs of memory multiplied by the number of days) is less than or equal to the number of memory days available for new On/Off CoD requests. Alternatively, obtain and enter a new On/Off memory enablement code.
HSCL902A	There are insufficient resources available to accept the On/Off CoD activation request.	The number of processors multiplied by the number of days cannot exceed the number of processor days remaining in the current On/Off CoD processor enablement period. Reduce either the number of processors or the number of days by amounts such that the product of these two values is less than or equal to the number of processor days remaining in the current On/Off CoD processor enablement period. Alternatively, you might obtain another On/Off CoD processor enablement code to extend your On/Off CoD processor enablement period.
HSCL902B	The On/Off CoD processor activation request cannot be accepted because On/Off CoD processors are currently activated. The Current On/Off CoD processors must be deactivated before a new On/Off CoD processor activation request can be accepted.	On/Off CoD processors are already activated. Deactivate current On/Off CoD processors. Retry the operation.
HSCL902C	The On/Off CoD memory activation request cannot be accepted because On/Off CoD memory is currently activated. The current On/Off CoD memory must be deactivated before a new On/Off CoD memory activation request can be accepted.	On/Off CoD memory is already activated. Deactivate the current On/Off CoD memory. Retry the operation
HSCL902D	The On/Off CoD processor activation request cannot be accepted because Trial CoD processors are currently activated. Either wait until the current Trial CoD activation period expires, or stop the current trial. Then retry the On/Off CoD processor activation request.	Wait until the current Trial CoD activation period expires, or stop the current trial. Retry the operation.
HSCL902E	The On/Off CoD memory activation request cannot be accepted because Trial CoD memory is currently activated. Either wait until the current Trial CoD activation period expires, or stop the current trial. Then retry the On/Off CoD memory activation request.	Wait until the current Trial CoD activation period expires, or stop the current trial. Retry the operation.
HSCL902F	The number of processors to activate is not valid. The number must be a multiple of {0} processors. Correct your entry, and try again.	Enter a valid number of processors. Retry the operation.
HSCL9030	The amount of memory to activate is not valid. The amount must be a multiple of {0} GB. Correct your entry, and try again.	Enter a valid amount of memory. Retry the operation.
HSCL9031	On/Off CoD processors are not currently enabled on the managed system. An On/Off processor enablement code must be obtained and entered before On/Off CoD processors can be activated.	On/Off CoD processors are not currently enabled on the system. Obtain an On/Off CoD processor enablement code, and then try again to activate the processors after the enablement code has been entered.
HSCL9032	On/Off CoD for memory is not currently enabled on the managed system. An On/Off memory enablement code must be obtained and entered before On/Off CoD memory can be activated.	An On/Off memory enablement code must be obtained and entered before On/Off CoD memory can be activated. Obtain and enter an On/Off memory enablement code. Retry the operation.
HSCL9033	The On/Off CoD processor deactivation request cannot be accepted because there are no On/Off CoD processors that are currently activated on the managed system.	An attempt was made to deactivate processors that have not been activated; therefore, there is no recovery action.
HSCL9034	The On/Off CoD memory deactivation request cannot be accepted because there is no On/Off CoD memory that is currently activated on the managed system.
HSCL9035	The On/Off CoD processors cannot be deactivated because they cannot be reclaimed by the managed system. Remove processors from partitions to make them available to be reclaimed by the system, then try again.	An attempt was made to deactivate On/Off CoD processors when there are not enough available processors for the system to reclaim. Deallocate the processors by checking the number of available processors and removing processors from partitions, if necessary, until the number available is equal to or greater than the number of processors that have been activated for On/Off CoD. Either use dynamic partitioning to remove the On/Off processors from a running partition, or shut down and delete the partition to release the processors. Retry the operation.
HSCL9036	The On/Off CoD memory cannot be deactivated because it cannot be reclaimed by the managed system. Remove memory from partitions to make it available to be reclaimed by the system, then try again.	An attempt was made to deactivate On/Off CoD memory when there is not enough available memory for the system to reclaim. Check the amount of available system memory, and then remove memory from partitions, if necessary, until the amount of available system memory is equal to or greater than the amount of On/Off CoD memory that is activated. (Use dynamic partitioning to remove memory from one or more running partitions, or delete one or more shut down partitions to release the memory.) Retry the operation.
HSCL9037	This request cannot be accepted because a CoD processor trial is not currently running on the managed system.
HSCL9038	This request cannot be accepted because a CoD memory trial is not currently running on the managed system.
HSCL9039	This request cannot be accepted because the activated Trial CoD processors cannot be reclaimed by the managed system. Remove processors from partitions to make them available to be reclaimed by the system, then try again.	An attempt was made to stop a CoD processor trial when there are not enough available processors for the system to reclaim. Check the number of available system processors, and then remove processors from partitions, if necessary, until the number of available system processors is equal to or greater than the number of Trial CoD processors that are activated. (Use dynamic partitioning to remove processors from one or more running partitions, or delete one or more shut down partitions to release the processors.) Retry the operation.
HSCL903A	This request cannot be accepted because the activated Trial CoD memory cannot be reclaimed by the managed system. Remove memory from partitions to make it available to be reclaimed by the system, then try again.	An attempt was made to stop a CoD memory trial when there is not enough available memory for the system to reclaim. Check the amount of available system memory, and then remove memory from partitions, if necessary, until the amount of available system memory is equal to or greater than the amount of Trial CoD memory that is activated. (Use dynamic partitioning to remove memory from one or more running partitions, or delete one or more shut down partitions to release the memory.) Retry the operation.
HSCL903B	An error occurred while trying to save the information to a diskette. Verify that the diskette is writeable and try the operation again. If the problem persists, contact your service representative.	Verify that the diskette is writeable and try the operation again. If the problem persists, contact your service representative.
HSCL903D	The Reserve CoD processor activation request cannot be accepted because On/Off CoD processors are currently activated. Either wait until the On/Off CoD processor request expires, or cancel the current On/Off processor activation request. Then try the Reserve CoD processor activation request again.	Either wait until the On/Off CoD processor request expires, or cancel the current On/Off processor activation request. Then retry the Reserve CoD processor activation request.
HSCL903E	The On/Off CoD processor activation request cannot be accepted because Reserve CoD processors are currently activated. The Reserve CoD processors must be deactivated before an On/Off CoD processor activation request can be accepted.	The Reserve CoD processors must be deactivated before an On/Off CoD processor activation request can be accepted.
HSCL903F	The Reserve CoD processor activation request cannot be accepted because Trial CoD processors are currently activated. Either wait until the Trial CoD activation period expires, or stop the current trial. Then try the Reserve CoD processor activation request again.	Either wait until the Trial CoD activation period expires, or stop the current trial. Then retry the Reserve CoD processor activation request.
HSCL9040	The number of CoD processors requested exceeds the number of inactive processors that are currently available on the managed system. Reduce the number of processors and try again.	Reduce the number of processors and try the operation again.
HSCL9041	Not enough processor days remain to accept the Reserve CoD processor activation request. Either reduce the number of processors requested or obtain and enter an additional Reserve capacity prepaid code.	Either reduce the number of processors requested, or obtain and enter an additional Reserve CoD processor enablement code.
HSCL9042	Reserve CoD for processors is not currently enabled on the managed system. A Reserve capacity prepaid code must be obtained and entered before Reserve CoD processors can be activated.	A Reserve processor enablement code must be obtained and entered before Reserve CoD processors can be activated. Enter a Reserve processor enablement code, and then try the operation again.
HSCL9043	The Reserve CoD deactivation request cannot be accepted because there are no Reserve CoD processors currently activated on the managed system.	Reserve CoD processors need to be activated before a deactivation request can be accepted.
HSCL9044	{0} There are not enough inactive processors available to accept this CoD code because Reserve CoD processors are currently activated. Reserve CoD processors must be deactivated before this CoD code can be accepted.	To make the processors available to be reclaimed by the system, deactivate Reserve CoD processors. Then re-enter the CUoD processor activation code.
HSCL9045	{0} There are not enough inactive processors available to accept this CoD code because Reserve CoD processors are currently activated. Reserve CoD processors must be deactivated before this CoD code can be accepted.	To make the processors available to be reclaimed by the system, deactivate the Reserve CoD processors. Then re-enter the Trial CoD processor activation code.
HSCL9046	{0} The On/Off processor enablement code cannot be accepted because Reserve CoD processors are currently activated. The Reserve CoD processors must be deactivated before an On/Off CoD processor enablement code can be accepted.	The Reserve CoD processors must be deactivated before an On/Off CoD processor enablement code can be accepted. Deactivate the Reserve CoD processors, and try the operation again.
HSCL9047	{0} The Reserve capacity prepaid code cannot be accepted because On/Off CoD processors are currently activated. The On/Off CoD processors must be deactivated before a Reserve capacity prepaid code can be accepted.	The On/Off CoD processors must be deactivated before a Reserve CoD processor enablement code can be accepted. Deactivate the On/Off CoD processors, and try the operation again.
HSCL9048	This operation is not allowed because unreturned CoD processors are currently in use on the managed system.	Check the number of unreturned On/Off CoD or Trial CoD processors that are currently in use. Remove that number of processors from partitions. (Use dynamic partitioning to remove processors from one or more running partitions, or delete one or more shut down partitions to release the processors.) Retry the operation.
HSCL9049	This operation is not allowed because unreturned CoD memory is currently in use on the managed system.	Check the amount of unreturned On/Off CoD or Trial CoD memory that is currently in use. Remove that amount of memory from partitions. (Use dynamic partitioning to remove memory from one or more running partitions, or delete one or more shut down partitions to release the memory.) Retry the operation.
HSCL904A	The activation code you entered has been rejected because it is not a Capacity on Demand code.	An attempt was made to enter an activation code that is not a Capacity on Demand code. The code might be a Virtualization Engine™ systems technologies activation code. If you intended to enter a Virtualization Engine systems technologies code, then select Manage On Demand Activations > Virtualization Engine Technologies > Enter Activation Code and try again. If you intended to enter a Capacity on Demand activation code, then obtain a Capacity on Demand activation code for this system and try again.
HSCL904B	This operation is not allowed because Mobile Capacity on Demand for processors is not supported on the managed system.	No recovery action.
HSCL904C	This operation is not allowed because Mobile Capacity on Demand for memory is not supported on the managed system.	No recovery action.
HSCL904D	The Capacity on Demand code type specified is not supported by the managed system.	No recovery action.
HSCL904E	{0} The CoD code cannot be accepted because the number of processors to be removed exceeds the number of permanent processors than can be removed on the managed system.	If possible, obtain and enter a new Mobile CoD processor remove code for removal of fewer processors.
HSCL904F	{0} The CoD code cannot be accepted because the amount of memory to be removed exceeds the amount of permanent memory than can be removed on the managed system.	If possible, obtain and enter a new Mobile CoD memory remove code for removal of less memory.
HSCL9050	{0} The CoD code cannot be accepted because the number of processors to be removed exceeds the number of processors that are currently available on the managed system.	Either remove processors from logical partitions to make them available to be removed, or if possible, obtain and enter a new Mobile CoD processor remove code for removal of fewer processors.
HSCL9051	{0}The CoD code cannot be accepted because the amount of memory to be removed exceeds the amount of memory that is currently available on the managed system.	Either remove memory from logical partitions to make it available to be removed, or if possible, obtain and enter a new Mobile CoD memory code for removal of less memory.
HSCL9052	The additional number of On/Off CoD processors requested exceeds the number of inactive processors that are currently available on the managed system. Reduce the number of processors requested and try again.	Reduce the number of processors requested and try again.
HSCL9053	The additional amount of On/Off CoD memory requested exceeds the amount of inactive memory that is currently available on the managed system. Reduce the amount of memory requested and try again.	Reduce the amount of memory requested and try again.
HSCL9054	The request to reduce the number of On/Off CoD processors cannot be accepted. The On/Off CoD processors to be deactivated cannot be deactivated because they cannot be reclaimed by the managed system. Remove processors from partitions to make them available to be reclaimed, then try again.	Remove processors from partitions to make them available to be reclaimed, then try again.
HSCL9055	The number of days specified is not valid.	No recovery action.
HSCL9056	The number of days specified is not valid.	No recovery action.