Remove and replace the model 7047-185 or 7037-A50 acoustic-feature back cover

The model 7047-185 or 7037-A50 has a removable back cover only if you have ordered the acoustic covers feature.

To remove the back cover from the model 7047-185 or 7037-A50, follow these steps:

Press down on the center tab of the cover until you unseat it from the back of the system unit, as shown in the following figure.
Remember: Use care not to dislodge any of the cables or cords attached to the system unit during this procedure.
Lift the top of the cover until the pins on the bottom clear the holes and the cover can be removed.
Figure 1. Removing the model 7047-185 or 7037-A50 back cover

To replace the back cover from the model 7047-185 or 7037-A50, follow these steps:

Attach all cables and cords.
Place the pins on the bottom of the cover into the slot at the bottom of the system unit, as shown in the following figure.
Rotate the cover until it snaps into place on the back of the system unit.
Remember: Use care not to dislodge any of the cables or cords attached to the system unit during this procedure.

Figure 2. Replacing the model 7047-185 or 7037-A50 back cover