Install the front cover on the stand-alone model 285, 52x, 55x, or OpenPower 720

To install the stand-alone model 285, 52x, 55x, or OpenPower™ 720 front cover, follow these steps:

  1. Place the two lower cover-locking tabs into the retaining slots located on the base of the system unit as shown in the following figure.
    Install the stand-alone model 520, 550, or OpenPower 720 front cover
  2. Rotate the cover up toward the top of the system, ensuring that the aligning pins are aligned with their matching slots located on the system.
  3. Gently push the cover in until the two cover-release levers are seated in their respective slots.
  4. Install or replace the door on the model 285, 52x, 55x, or OpenPower 720.
Parent topic: Install the front cover on the model 285, 52x, 55x, OpenPower 720, or the 0595 expansion unit
Send feedback | Rate this page