Install the front cover on the rack-mounted model 285, 52x, 55x, or OpenPower 720, or the 0595 expansion unit

To install the front cover on a rack-mounted model 285, 52x, 55x, OpenPower™ 720, or the 0595, follow these steps:

  1. Position the cover on the front of the system or expansion unit so that the two thumbscrews C align with the screw holes on the front of the system or expansion unit A, as shown in the following figure.
  2. Push the cover-release latches B in the direction of the arrows to attach the cover to the front of the system or expansion unit. The latches will hold the cover in place.
    Install the rack-mounted model 520, 550, or OpenPower 720 front cover
  3. Tighten the thumbscrews.
  4. Close the front rack door.
Parent topic: Install the front cover on the model 285, 52x, 55x, OpenPower 720, or the 0595 expansion unit
Send feedback | Rate this page