Install the service access cover on the rack-mounted model 51x,52x, 55x, 710,
or OpenPower 720
To install the service access cover on a rack-mounted model 51x,52x, 55x, 710,
or OpenPower™ 720, refer to Figure 1and Figure 2, and
follow these steps:
Place the service access cover A on the
top of the system unit, approximately 25 mm (1 in.) from the front of the
system unit.
Hold the service access cover against the system unit, and slide
it toward the front of the system. Ensure that the fan LED cables
do not get caught on the front edge of the service access cover as you move
it forward. The tabs on the service access cover slide beneath the upper chassis
ledge, and the two thumbscrews align with the screw holes at the back of the
system unit.
Tighten the thumbscrews B located at the
back of the cover.
Figure 1. Install the service
access cover on the rack-mounted model 52x, 55x, or OpenPower 720
Figure 2. Install the service access cover on the
model 51x orOpenPower 710
