PCI-X DDR dual-channel Ultra320 SCSI RAID adapter (FC 0648, 1913, 5737, 5776)(CCIN 571B)

Learn about the PCI-X DDR dual-channel Ultra320 SCSI RAID adapter.

The PCI-X DDR dual-channel Ultra320 SCSI RAID adapter is a high-performance SCSI adapter for PCI-X and PCI systems. The adapter provides RAID 0,10,5,6 capability, 90 MB of write cache, and can address up to 30 16-bit SCSI physical disk drives on two independent SCSI buses. The adapter uses and supports low voltage differential (LVD) drivers and receivers only. Each SCSI bus can either be internal (on systems that support internal SCSI devices or backplane attachments) or external, but not both. Internally attached Ultra320 devices run at a data rate of up to 320 MBps on systems that have internal backplanes that are capable of supporting Ultra320 speeds.

PCI-X DDR dual-channel Ultra320 SCSI RAID adapter specifications

Item
Description
FRU number
39J3534 (FC 5737)
39J2418 (FC 1913)
I/O bus architecture
PCI 2.2 compliant
Slot requirement
One available 3.3 volt PCI or PCI-X slot
Maximum number
For system-specific adapter placement information, see PCI placement in the system unit or expansion unit
Operating system or partition requirements
AIX 5L™ Version 5.2 with the 5200-07 Technology Level, or later
AIX 5L™ Version 5.3 with the 5300-03 Technology Level, or later
Red Hat® Enterprise Linux® version 4, Update 2 or newer
SUSE Linux Enterprise Server 9 Service Pack 2 or newer
i5/OS® V5R3 or later
Required software or drivers
AIX® - devices.pci.1410be02 device driver package (http://techsupport.services.ibm.com/server/mdownload2/adapter.html)
Linux - ipr driver Version 2.0.10.3 (or later) for SLES 9 kernels, Version 2.0.11.1 (or later) for RHEL4 kernels, or Version 2.0.13 (or later) for kernel.org kernels (kernel version 2.6.12 or later)
Tools
None
Cables
Attachment cables are shipped with the attaching subsystem or device.

Send feedback | Rate this page