PCI-X quad-channel Ultra320 SCSI RAID adapter (FC 0649, 5582, 5583, 5738, 5777)(CCIN 571E)

Learn about the PCI-X quad-channel Ultra320 SCSI RAID adapter for IBM System i5™ and eServer™ i5.

Feature codes

Adapter features

  • 64-bit, 3.3 volt
  • Address support for up to 60, 16-bit SCSI physical disk drives on 4 independent internal SCSI buses. (The actual number of drives is limited by physical device placement limitations.
  • Four internal (only) U320 SCSI ports. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.
  • Utilizes Low Voltage Differential (LVD) drivers and receivers. It can support SE and LVD devices on SCSI bus 1, but LVD devices only on other SCSI busses.
  • Up to 1.5 GB of compressed write cache, and up to 1.6 GB of compressed read cache
    • 390 MB/1.5 GB compressed write cache.
    • 415 MB/1.6 GB compressed read cache.
  • Removable Cache Card with a concurrently maintainable battery. The removable transportable cache card can be used by service providers for cache data recovery procedures.
  • PCI-X support
  • RAID capability:
    • Supports RAID and non-RAID DASD, tape, and optical devices.
    • 0649 provides RAID 0, 10, 5, 6 capability.
    • 5582 and 5583 provide RAID-5 or RAID-6 capability.
      • A minimum of 3 disk drives are required for RAID-5.
      • A minimum of 4 disk drives are required for RAID-6.
      • 574F Auxiliary Cache IOA is required for either RAID level.

        For information about using an auxiliary-write cache IOA, see Auxiliary-write cache IOA (FC 5582, 5583)(CCIN 574F).

Specifications

Item Description
Adapter FRU number 42R5130
Cache battery FRU number 39J5554
Cables Attachment cables are included with the attaching subsystem or device.
I/O bus architecture PCI-X compliant
Slot requirement One available 3.3 volt PCI or PCI-X slot when the disk controller adapter is used by itself.

Two available 3.3 volt PCI or PCI-X slot when the disk controller adapter is used with an auxiliary-write cache adapter.

Operating system or partition requirements i5/OS:
AIX
  • AIX 5L™ Version 5.2 with the 5200-08 Technology Level, or higher
  • AIX 5L Version 5.3 with the 5300-04 Technology Level, or higher.

Required driver: devices.pci.1410bf02 device driver package. To download the driver, see the Microcode Download Web page at http://www14.software.ibm.com/webapp/set2/firmware/gjsn

Linux
  • Red Hat® Enterprise Linux version 4, service pack 2 or newer.
  • SUSE Linux Enterprise Server 9, service pack 2 or newer.

Requires Version 2.0.10.3 (or later) for SLES 9 kernels, Version 2.0.11.1 (or later) for RHEL 4 kernels, or Version 2.0.13 (or later) for kernel.org kernels (kernel version 2.6.12 or later)

Installation Information See PCI placement in the system unit or expansion unit.

Adapter side view, end view and SCSI connectors

Figure 1. Adapter side view and end viewSide view and end view
Figure 2. Adapter SCSI connectorsSide view
 A 
SCSI connector 1 = bus 0
 B 
SCSI connector 2 = bus 1
 C 
SCSI connector 3 = bus 2
 D 
SCSI connector 4 = bus 3

Send feedback | Rate this page