Rebuild data on a replacement disk drive using Linux

To rebuild data on the replacement disk drive, complete the steps listed here.

For an unprotected disk drive

If the disk drive you are replacing is in a RAID Level 0 disk array or in a failed RAID Level 5 or RAID Level 10 disk array, perform these tasks:

  1. Re-create the disk array.
  2. Re-create the file systems on the disk array.
  3. Copy the data back to the restored disk array from your backup media.

For information on these tasks, see the PCI-X SCSI RAID Controller Reference Guide for Linux(R), SA23-1327.