FSPSP10

The part indicated in the FRU list that follows this procedure is invalid or missing for this system's configuration.

Refer to Locating FRUs for instructions for removing and replacing any FRUs called out by the following procedure.

Perform the following to correct the problem:

Does word 8 (the 8 leftmost characters in the 2nd line of function 13) of the reference code end with 02 or 04?
- No: Go to step 3.
- Yes: Continue with the next step.
The FRU that is called out after this procedure is either missing or invalid. Is that FRU installed and connected or plugged in properly?
- Yes: The installed FRU is invalid. Remove that FRU. Then contact your next level of support to determine the correct FRU. This ends the procedure.
- No: The FRU is missing. If the FRU is present but not connected, reconnect it and perform a slow boot (see Performing a slow boot). Otherwise, contact your next level of support to determine the missing FRU. This ends the procedure.
Does word 8 end with 01 or 05?
- No: Return to the Starting a Service Call. This ends the procedure.
- Yes: The FRU that is listed after this procedure has the same serial number as another FRU in the system. Remove all but one of the FRUs that are listed after this procedure and then perform a slow boot (see Performing a slow boot). This ends the procedure.