ALTMANL

An Integrated xSeries(R) server (IXS) for iSeries(TM) service call might be needed to fix the problem on the IXS.

Note: An error condition is indicated by the blinking frame ID on the IXS card. When an error occurs, it can take up to ten minutes for the frame ID to start blinking, and up to one minute (after the error is reset) for the frame ID to stop blinking.

Use the following table to find instructions for the reference code you are experiencing

Table 1. IXS reference codes and instructions
Reference code Instructions
1xxx-8910 Check the system error light (amber exclamation point) on the IXS panel.
  • If the system error light is on, call the customer's IXS service provider.
  • If the system error light is not on, see TWRCARD.
Note: Removal of the ac line cord on the IXS unit is required to reset the flashing frame-indicating LEDs on the tower card.
1xxx-8920 Call the customer's IXS service provider.

Note: Removal of the AC line cord on the IXS unit is required to reset the flashing frame-indicating LEDs on the tower card.

This ends the procedure.