FI01140

FI01140 indicates that the I/O (SCSI) bus cable is the failing item.

Perform the following steps:

1. Are there external devices attached?
   • No: Continue with the next step.
   • Yes: Choose from the following options:
     • For SCSI attached external devices, see See the symbolic FRU EXTSCSI.
     • For Fibre Channel attached external devices, see FCCABLE.
2. Find the IOP address. See System reference code (SRC) address formats, or see "System reference code (SRC) address formats" in the service guide for the system unit.
3. To determine the location of the I/O processor card, see Physical Locations, or see "Physical Locations" in service guide for the system unit on which you are working, and get the type from the card in that location or address.
4. Exchange the failing item associated with the IOP address.

   Note: Any of the SCSI cables or backplanes between the IOA and the device could be the failing item.

   Note the cable type and refer to the Site and Hardware Planning document, order number SA76-0091 to determine the FRU part number to replace.