FSPSP22

The system has detected that a processor chip is missing from the system configuration because JTAG lines are not working.

Refer toLocating FRUs for instructions for removing and replacing any FRUs called out by the following procedure.

  1. Power off the system.
  2. Replace the service processor.
  3. Perform a slow boot..
  4. Does the problem persist?
  5. Perform the following for each system processor until the problem is resolved:
    1. Power off the system.
    2. Replace one of the system processors.
    3. Perform a slow boot after replacing each processor.
    This ends the procedure.