FSPSP27

Refer toLocating FRUs for instructions on replacing any FRUs called out by this procedure.

1. Was the FRU called out before this procedure a Memory DIMM (Un-P2-C1-Cx or Un-P2-C2-Cx)?
   • No: Go to step 10
   • Yes: A Memory DIMM attention line has an error. Continue to the next step.
2. Replace the Service Processor (Un-P1-C11) from the same drawer as the Memory DIMM.
3. Perform a slow boot.
4. Does the problem persist?
   • No: This ends the procedure.
   • Yes: Continue to the next step.
5. Replace the Processor Card (Un-P2-C1 or Un-P2-C2) on which you previously replaced DIMMs.
6. Perform a slow boot.
7. Does the problem persist?
   • No: This ends the procedure.
   • Yes: Continue with the next step.
8. Replace the System Backplane (Un-P1) from the same drawer as the Memory DIMM.
9. Perform a slow boot. This ends the procedure.
10. Was the FRU called out before this procedure a Processor Card (Un-P2-C1 or Un-P2-C2) or GX Adapter Card (Un-P1-C8 or Un-P1-C9)?
    • No:Go to step 16
    • Yes: A Processor Card or GX Adapter Card attention line has an error. Continue to the next step.
11. Replace the Service Processor (Un-P1-C11) from the same drawer as the Processor Card or GX Adapter Card.
12. Perform a slow boot.
13. Does the problem persist?
    • No: This ends the procedure.
    • Yes: Continue with the next step.
14. Replace the System Backplane (Un-P1) from the same drawer as the Processor Card or GX Adapter Card.
15. Perform a slow boot. This ends the procedure.
16. Was the FRU called out before this the System Backplane (Un-P1)?
    • No: Contact your next level of support. This ends the procedure.
    • Yes: A P5IOC2 attention line has an error. Continue to the next step.
17. Replace the Service Processor (Un-P1-C11) from the same drawer as the System Backplane.
18. Perform a slow boot. This ends the procedure.