FSPSP29

Refer toLocating FRUs for instructions for removing and replacing any FRUs called out by the following procedure.

1. Power off the system (see Powering on and powering off).
2. Replace the Service Processor (Un-P1-C11).
3. Perform a slow boot.
4. Does the problem persist?
   • Yes: Continue with the next step.
   • No: Go to Verifying a repair. This ends the procedure.
5. Replace the system backplane (Un-P1).
6. Perform a slow boot.
7. Does the problem persist?
   • Yes: Continue with the next step.
   • No: Go to Verifying a repair. This ends the procedure.
8. Replace each Secondary Unit System Backplane (Un-P1), one at a time, until the problem is resolved. This ends the procedure.