Function 55: View and change platform dump data

This function allows you to view and change the platform dump data. This function is available only in the manual operating mode.

When you select function 55 and press Enter, you can view and change the platform dump collection policy, platform dump hardware content, and platform dump firmware content settings.

The following table shows an example of how to view the platform dump data.

Table 1. Function 55: View the platform dump data
Function/Data Action or description 
5 5 _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to scroll to function 55. 
5 5 * * _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to enter subfunction mode. 
5 5 0 0 _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to view the platform dump variables. 
5 5 0 0 _ xxyyzz_ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to process the selected subfunction.
  • xx = Collection policy
  • yy = Hardware content
  • zz = Firmware content
 
5 5 * * _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to select subfunction exit. 
5 5 _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to exit subfunction mode.

The following table shows an example of how to change the platform dump data.

Table 2. Function 55: Change the platform dump data
Function/Data Action or description 
5 5 _ _ _ _ _ _ _ _ _ _ _ _ _ _  
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to scroll to function 55. 
5 5 * * _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to enter subfunction mode. 
5 5 0 2 _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to select to change the platform dump variable.
  • 01 = Set platform dump collection policy to disable
  • 02 = Set platform dump collection policy to enable
  • 03 = N/A - will always display FF in Line 1 when selected
  • 04 = Set platform dump hardware content to maximum
  • 05 = Set platform dump hardware content to automatic
  • 06 = N/A - will always display FF in Line 1 when selected
  • 07 = N/A - will always display FF in Line 1 when selected
  • 08 = Set platform dump firmware content to minimum
  • 09 = Set platform dump firmware content to maximum
  • 0A = Set platform dump firmware content to physical I/O
  • 0B = Set platform dump firmware content to virtual I/O
  • 0C = Set platform dump firmware content to HPS cluster
  • 0D = Set platform dump firmware content to InfiniBand I/O
 
5 5 0 2 _ 0 0 _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to process the selected subfunction.
  • 00 = Accept
  • FF = Reject
 
5 5 * * _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to select subfunction exit. 
5 5 _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to exit subfunction mode.