FSPSP09

A problem has been detected with a memory DIMM, but it cannot be isolated to a specific memory DIMM.

1. Use the following table to determine the action to perform.

   System	Action
   8203-E4A, 9407-M15, and 9408-M25	Replace all the memory DIMMs on the system backplane. See System FRU locations for FRU location information.
   8204-E8A and 9409-M50	Replace all the memory DIMMs that are located on the same processor card (starting with processor card 1: Un-P1-Cx-Cy, with x =1 through 4, and 5 through 9, and y =13 for processor card 1 through 16 for processor card 4). See System FRU locations for FRU location information.
   8234-EMA, 9117-MMA, 9406-MMA	Using the FRU called out after this procedure, replace ALL the memory DIMMs that reside on the same memory board/card. See System FRU locations for FRU location information.
   9125-F2A	Using the FRU called out after this procedure, replace ALL the memory modules that reside on the same memory board/card.
   (9119-FHA	Using the FRU called out after this procedure, replace ALL the memory DIMMs that reside on the same memory board/card.

2. Perform a slow boot after replacing all the memory DIMMs. Refer to Performing a slow boot . This ends the procedure.