FSPSP11

The service processor has detected an error on the RIO/HSL port in the system unit.

1. Verify that the system's firmware is at the latest level. Update the system's firmware if necessary.
2. If the problem persists, use the following table to determine the action to perform.

   System	Action
   8203-E4A, 9407-M15, 9408-M25, 8204-E8A, and 9409-M50	Replace the system backplane (Un-P1). Then perform a slow boot. See Performing a slow boot . This ends the procedure.
   8234-EMA, 9117-MMA, 9406-MMA	Replace each I/O backplane one at a time. Perform a slow boot between each replacement until the problem is resolved. See Performing a slow boot . This ends the procedure.
   9119-FHA	Replace the processor book. Perform a slow boot. See Performing a slow boot .This ends the procedure.